1.5 Before Leaving Your Desk

The FWD/DND button light shows the current status as follows: 

Off: Neither feature is set. 

Red on: Do Not Disturb (DND) mode 

Flashing red slowly: FWD mode

If a proprietary telephone (PT) user sets the FWD—Busy/No Answer feature, the FWD/ DND button light will keep flashing while on-hook. To stop the button from flashing, go off- hook and enter "716#".

A call can only be automatically forwarded one time. 

In the example below, extension A's calls are being forwarded to extension B. If extension B tries to set FWD to extension C, the extension B user hears a reorder tone and the setting is denied. If extension B has already set FWD to extension C, and extension A tries to set FWD to extension B, the setting is also denied.

AA

B CB C

You can confirm the current FWD destination by pressing the FWD/DND button while on- hook.

CO-to-CO Line Call Duration

The length of outside-to-outside (CO-to-CO) line calls may be limited through system programming. 

Both the outside caller and the outside destination will hear a warning tone 15 seconds before a specified time limit. When the timer expires, the call is disconnected.

Customising Your Phone

3.1.3 Customising the Buttons 

Create or edit an FWD/DND (Call Forwarding/Do Not Disturb).

User Manual

69

Page 69
Image 69
Philips KX-TEA308 user manual Flashing red slowly FWD mode, CO-to-CO Line Call Duration