1.4 During a Conversation
To put the third party on hold and talk to the original party
SLT
Press Recall/hookswitch. | Talk. |
To leave a 3-party conference call
PT/SLT
When you are talking with 2 extensions or one extension and one outside party
The other 2 parties can continue their conversation.
• *1 You may have to enter the Call Hold feature number after pressing the Recall/ hookswitch on your single line telephone (SLT), depending on the SLT Hold Mode of your PBX.
Call Hold feature number:
–Plan 1: 20 (United Kingdom/New Zealand: 50)
–Plan 2/Plan 3: #20 (United Kingdom/New Zealand: #50)
Ask your manager or dealer about the mode assigned to your PBX.
•*2 Enter "#3" when "Plan 2" or "Plan 3" is selected as the numbering plan through system programming.
•To return to the held call before the third party joins, press the corresponding CO or INTERCOM button or press the Recall/hookswitch.
•By pressing the CO button corresponding to an outside (CO) line that is not being used by the conference, a proprietary telephone (PT) user can exit from the conference, leaving the other 2 parties connected unless they are both on outside (CO) lines. If the other parties are both on outside (CO) lines, they will be disconnected.
Leaving a Conference Call (Unattended Conference)
The PT user who originated a conference with 2 outside parties can leave the |
|
conference and allow the other parties to continue the conversation. Certain |
|
extensions may be restricted from executing this feature through system |
|
programming. | No SLT |
|
User Manual
59