1.4 During a Conversation

• * You may have to enter the Call Hold feature number after pressing the Recall/hookswitch on your single line telephone (SLT), depending on the SLT Hold Mode of your PBX.  Call Hold feature number:

Plan 1: 20 (United Kingdom/New Zealand: 50)

Plan 2/Plan 3: #20 (United Kingdom/New Zealand: #50)

Ask your manager or dealer about the mode assigned to your PBX.

You can go on-hook before the destination extension answers the call. If the destination extension does not answer the call within a specified time period, you will hear an alarm tone, and the call will return to you. If you do not answer the call within 30 minutes after it returns to you, the call will be disconnected.

When the dialled extension is busy, you may access the extension by entering "2" (Busy Station Signalling [BSS]) or "3" (Executive Busy Override) and then going on-hook.

Transferring to an Outside Destination

You can transfer incoming calls to outside destination when your PT is permitted through system programming.

No SLT

PT

During a conversation

 

(CO)

 

OR

C.Tone &

outside (CO)

D.Tone

extension no.

line access no.

Press TRANSFER.

Press CO or dial outside

 

(CO) line access number.

outside

phone no.

R.B.Tone

 

 

Dial outside phone

Talk.

On-hook.

number.

 

 

 

 

The call is transferred.

CO-to-CO Line Call Duration

The length of outside-to-outside (CO-to-CO) line calls may be limited through system programming.

Both the outside caller and the outside destination will hear a warning tone 15 seconds before a specified time limit. When the timer expires, the call is disconnected.

To return to the held call before the destination answers, press the TRANSFER button or corresponding CO/INTERCOM button.

After transferring the call to an outside party, you can join the call by pressing the CO button that you used to transfer the call. A 3-party conference call is established (Conference).

To change the transfer destination before going on-hook, press the CO button whose indicator is flashing slowly to retrieve the call, then repeat the Call Transfer procedure.

Customising Your Phone

3.1.3 Customising the Buttons

Create or edit a Direct Station Selection (DSS) button.

User Manual

49

Page 49
Image 49
Philips KX-TEA308 user manual Transferring to an Outside Destination, Outside CO, Line access no