1.5 Before Leaving Your Desk

Callers cannot put a call on hold by pressing the TRANSFER or HOLD button while recording a voice message.

If you enter a wrong voice message access code, when trying to play back voice messages from an outside telephone, the call will be disconnected after 10 seconds. When playback is complete, or you have no voice messages recorded, the call will be disconnected after 5 seconds.

When you erase voice messages, the caller's information is erased simultaneously.

The MESSAGE button light or Message/Ringer Lamp shows the current status of the voice message area as follows:

Off: No voice messages, or old voice messages only

Red on: New voice messages

If your telephone has no MESSAGE button or Message/Ringer Lamp, you cannot tell by looking whether there are new voice messages.

If a new voice message has been recorded, you will hear dial tone 4 when going off-hook.

Dial Tone 4

1 s

When the remaining recording time for the PBX is less than 5 minutes or when 125 voice messages have been recorded, the display informs you that the voice message area is full, and you hear dial tone 5 when going off-hook. If the remaining recording time goes back to being 5 minutes or more, for example, when messages are erased, the display returns to the idle status display and you will hear another dial tone instead of dial tone 5 when going off-hook.

Dial Tone 5 1 s

A proprietary telephone (PT) user can listen to voice messages by entering the Message Waiting Answer feature number, "784# (7840)".

Customising Your Phone

3.1.3 Customising the Buttons

Create or edit a Message button, Caller ID Indication—Personal button, or Caller ID Indication—Common button.

82

User Manual

Page 82
Image 82
Philips KX-TEA308 user manual Dial Tone 5 1 s