B&B Electronics EIR618-2SFP-T Hardware Installation

Manual Documentation Number: EIR618-2SFP-T_5107m 19

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com

B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com

Hardware Installation

1. Unpack the Industrial switch.

2. Ensure the DIN-Rail is tightly screwed to the Industrial switch. If not,

refer to DIN-Rail Mounting section for DIN-Rail installation. To panel

mount the Industrial switch, refer to Panel Mounting section.

3. Apply power to the switch (refer to the Wiring the Power Inputs

section). The power LED will light.

4. Connect CAT 5 cables to the Industrial switch’s RJ-45 ports and to the

network devices

[NOTE] If the network devices do not support MID/MDIX, a

crossover cable may be required.