Fault Relay Alarm
Power Failure: When the check box is marked, the Fault LED will light if the power source fails.
Port Link Down/Broken: When the check box is marked, the Fault LED will light if a port link goes down.
Fault Relay Alarm interface
SNTP Configuration
The SNTP allows you to synchronize switch clocks.
1.SNTP Client: Enables or disables the SNTP function.
2.Daylight Saving Time: Enables or disables daylight saving time. When this function is enabled, the time period must be entered.
3.UTC Time zone: Sets the local time zone.
Manual Documentation Number: | 61 |
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353
