Introduction
This managed industrial switch comes equipped with a proprietary redundant network protocol—X-Ring which provides an easy way to establish a redundant Ethernet network. With ultra high-speed recovery time (less than 300 ms) and a long MTBF (Mean Time Between Failures) the industrial switch will continue to operate until a Gigabit network infrastructure has been established, without requiring extra upgrade costs.
In addition to 10/100/1000Base-TX fast Ethernet ports, the switch has SFP (mini-GBIC) ports. Traditional RJ-45 ports can be used for up linking short distance (less than 100 m) wide-band paths, while the SFP slots can be used for the application of wideband uploading and long distance transmissions adding flexibility
Features
System Interface/Performance
¾RJ-45 ports support Auto MDI/MDI-X Function
¾SFP (mini-GBIC) supports 100/1000 Dual Mode
¾Store-and-Forward Switching Architecture
¾Back-plane (Switching Fabric): 7.2Gbps
¾1Mbits Packet Buffer
¾8K MAC Address Table
¾Wide Operating Temperature (-40oC to 75oC)*
Case/Installation
¾IP-30
¾DIN-Rail and Panel Mount
Power Supply
¾Wide Range Redundant Power Design
¾Reverse Polarity Protection
¾Current Overload Protection
Manual Documentation Number: EIR618-2SFP-T_5107m | 1 |
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com