B&B Electronics EIR618-2SFP-T manual Trunk Commands Set

		operation for Ethernet
		ports. Use the disable
		form of this command
		to disable the port.
			switch(config)#interface
show interface	I	show interface
configuration		configuration status	fastEthernet 2
			switch(config-if)#show interface
			configuration
			switch(config)#interface
show interface status	I	show interface actual
		status	fastEthernet 2
			(config-if)#show interface status
			switch(config)#interface
show interface	I	show interface statistic
accounting		counter	fastEthernet 2
			(config-if)#show interface
			accounting
			switch(config)#interface
no accounting	I	Clear interface
		accounting information	fastEthernet 2
			switch(config-if)#no accounting

Trunk Commands Set

Commands	Level	Description		Example
aggregator priority	G	Set port group system		switch(config)#aggregator priority
[1~65535]		priority	22
			switch(config)#aggregator
aggregator activityport	G	Set activity port
[Group ID]				activityport 2
[Port Numbers]
				switch(config)#aggregator group
aggregator group	G	Assign a trunk group
[GroupID] [Port-list]		with LACP active.		1 1-4 lacp workp 2
lacp		[GroupID] :1~3		or
workp		[Port-list]:Member port		switch(config)#aggregator group
[Workport]		list, This parameter		2 1,4,3 lacp workp 3
		could be a port
		range(ex.1-4) or a port
		list separate by a

32	Manual Documentation Number: EIR618-2SFP-T_5107m
	B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax	815-433-5104 – www.bb-elec.com
	B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444	– Fax +353 91-792445 – www.bb-europe.com