B&B Electronics EIR618-2SFP-T Spanning-tree, Hello-time seconds, Forward-time seconds, ~200000000

		from the root switch. If
		a switch does not
		receive a bridge
		protocol data unit
		(BPDU) message from
		the root switch within
		this interval, it
		recomputed the
		Spanning Tree
		Protocol (STP)
		topology.
			switch(config)#spanning-tree
spanning-tree	G	Use the spanning-tree
hello-time [seconds]		hello-time global	hello-time 3
		configuration
		command to specify
		the interval between
		hello bridge protocol
		data units (BPDUs).
			switch(config)#spanning-tree
spanning-tree	G	Use the spanning-tree
forward-time [seconds]		forward-time global	forward-time 20
		configuration
		command to set the
		forwarding-time for the
		specified
		spanning-tree
		instances. The
		forwarding time
		determines how long
		each of the listening
		and learning states
		last before the port
		begins forwarding.
			switch(config)#interface
stp-path-cost	I	Use the spanning-tree
[1~200000000]		cost interface	fastEthernet 2

36	Manual Documentation Number: EIR618-2SFP-T_5107m
	B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax	815-433-5104 – www.bb-elec.com
	B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444	– Fax +353 91-792445 – www.bb-europe.com