B&B Electronics EIR618-2SFP-T manual IP Configuration, IP configuration interface

IP Configuration

Configure the IP Settings and DHCP client function

„DHCP Client: Used to enable or disable the DHCP client function. When enabled, the switch’s IP address is assigned by the network DHCP server. The default IP address will be replace by the DHCP server assigned IP address. After clicking the ‘Apply’ button, a popup dialog will indicate that the current IP will be lost and the new IP address must be retrieved from the DHCP server.

„IP Address: A static IP Address may be assigned. The default IP is 192.168.16.1.

„Subnet Mask: Assign the subnet mask of the IP address. This does not have to be done if the DHCP client function is enabled.

„Gateway: Assign the network gateway. The default gateway is 192.168.16.254.

„DNS1: Assign the primary DNS IP address.

„DNS2: Assign the secondary DNS IP address.

„Click Apply

IP configuration interface

Manual Documentation Number: EIR618-2SFP-T_5107m 53

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com

B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com