B&B Electronics EIR618-2SFP-T manual Ring Interface

„Enable Coupling Ring: Mark the check box to enable the coupling ring function.

„Coupling port: Assign the member port.

„Control port: Set the switch as the master switch in the coupling ring. Enable Dual Homing: Set up one of port on the switch to be the Dual Homing port. In an X-Ring group, only one port can be the Dual Homing port. Dual Homing only works when the X-Ring function is enabled.

„Click Apply .

X-ring Interface

[NOTE] 1. When the X-Ring function is enabled, disable RSTP.

2.If the configuration is not saved, it will be lost when the switch is powered off.

Manual Documentation Number: EIR618-2SFP-T_5107m 93

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com

B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com