When playing a software encoded with the Dolby Digital or
DTS Digital Surround, “DGTL AUTO” may not work properly and the following symptoms may occur:
•Sound does not come out at the beginning of playback.
•Noise comes out while using the searching or skipping chapters or tracks.
In this case press CONTROL UP 5/ | CONTROL |
DOWN ° to select “DGTL D.D” or | DOWN UP |
| |
“DGTL DTS” while “DGTL AUTO” still |
|
remains on the display. |
|
•Each time you press the button, the input mode changes as follows.
DGTL AUTO DGTL D.D
(Digital)(Digital Dolby Digital)
DGTL DTS
(Digital)
When selecting “DGTL D.D” or “DGTL DTS,” following indicators showing detected signals light up on the display.
: Always lights up.
When selecting “DGTL D.D”
DIGITAL : • Lights up when Dolby Digital signals come in.
•The frame flashes when Dolby Digital signals are not recognized.
When selecting “DGTL DTS”
: • Lights up when DTS Digital Surround signals come in.
•The frame flashes when DTS Digital Surround signals are not recognized.
Note:
When you turn off the power or select another source, “DGTL D.D” and “DGTL DTS” settings are canceled and the digital input mode is automatically reset to “DGTL AUTO.”
To change the input mode back to analog input, select
“ANALOG” in step 2.
From the remote control:
1. Press the source selecting | DVD | DVD MUILTI | CD | FM/AM | |
| |||||
button (DVD, CD, TV/ | TV/DBS | VIDEO | CDR | PHONO | |
DBS, CDR, or TAPE/MD)* | VCR 1 | VCR 2 | TAPE/MD | USB | |
for which you want to | |||||
|
|
|
| ||
change the input mode. |
|
|
|
|
Note:
*Among the source listed above, you can select the digital input only for the sources which you have selected the digital input terminals for. (See “Digital Input (DIGITAL IN) Terminal Setting” on page 19.)
2. Press ANALOG/DIGITAL INPUT | ANALOG/DIGITAL | |
INPUT | ||
to change the input mode. | ||
|
•Each time you press the button, the input mode changes as follows:
DGTL AUTO ANALOG
(Digital)
When playing a software encoded with the Dolby Digital or
DTS Digital Surround, “DGTL AUTO” may not happen to work well. In this case press CONTROL UP 5/DOWN °on the front panel to select “DGTL D.D” or “DGTL DTS” (while “DGTL AUTO” remains on the display).
Note:
You can select “DGTL D.D” or “DGTL DTS” from the remote control by
using the
21