JVC RX-8010RBK, RX-8012RSL Release CATV/DBS, Release VCR, Try to operate your VCR by pressing VCR

To change the transmittable signals for operating a CATV converter or DBS tuner

1.Press and hold CATV/DBS .

2.Press CATV/DBS CONTROL.

3 Enter manufacturer’s code using buttons 1–9, and 0.

See the following lists to find the code.

4. Release CATV/DBS .

The following buttons can be used for the CATV converter and DBS tuner:

CATV/DBS	:	Turns on and off the CATV converter
		or DBS tuner.
CH +/–:		Changes the channels.
1 – 10, 0, 100+ (+10):		Selects the channels.
		The 10 button will function as the

ENTER button if your equipment requires pressing ENTER after selecting a channel number.

Note:

Refer to the manual supplied with your CATV converter or DBS

tuner.

5. Try to operate your CATV converter or DBS

tuner by pressing CATV/DBS .

When your CATV converter or DBS tuner turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

CATV converter or DBS tuner, try each one until the correct one is entered.

Note:

You cannot use both of the CATV converter and DBS tuner at the

same time.

For DBS tuner

Manufacturer	Codes
JVC	56, 57, 67
AMSTRAD	43, 44, 45, 46, 47, 48, 49
BLAUPUNKT	30
ECHOSTAR	50, 51, 67
GOLDSTAR	31
GRUNDIG	32, 33
HIRSHMANN	48, 52, 53, 54, 55
INSTRUMENT	68
ITT/NOKIA	34
KATHREIN	52, 58, 59, 60, 61, 62, 63
NEC	35, 36
ORBITECH	48
PHILIPS	37, 38
RCA	65
SAMSUNG	39, 40
SCHWAIGER	61, 64
SIEMENS	41, 42
SONY	66
TECHNISAT	48

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

For CATV converter

Manufacturer	Codes
GENERAL INSTRUMENT	06, 07, 08, 09, 10, 11,
	12, 13, 14, 29
HAMLIN/REGAL	01, 02, 03, 04, 05
JERROLD	06, 07, 08, 09, 10, 11,
	12, 13, 14
OAK	15, 16, 17
PANASONIC	18, 19, 20
PIONEER	21, 22
SCIENTIFIC ATLANTA	23, 24, 25
TOCOM	26
ZENITH	27, 28

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

To change the transmittable signals for operating another manufacturer’s VCR

1.Press and hold VCR 1 .

2.Press VCR 1.

3.Enter manufacturer’s code using buttons 1–9,

and 0.

See the list on the next page to find the code.

4. Release VCR 1 .

The following button can be used for operating the VCR:

VCR 1 : Turns on and off the VCR.

After pressing VCR 1, you can perform the following operations on the VCR:

CH +/–:	Changes the TV channels on the
	VCR.
1 – 10, 0, 100+ (+10):	Selects the TV channels.
	The 10 button will function as the
	ENTER button if your VCR requires
	pressing ENTER after selecting a
3 PLAY:	channel number.
	Starts playback.
REW:	Rewinds a video tape.
FF:	Fast winds a video tape.
7 STOP:	Stops operation.
8 PAUSE:	Pauses.
REC PAUSE:	Enters recording pause.

Note:

Refer to the manual supplied with your VCR.

5. Try to operate your VCR by pressing VCR 1 .

When your VCR turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

VCR, try each one until the correct one is entered.

55