Do not connect the AC power cord until all other connections have been made.

Connecting a DVD recorder or DVD player with its analog discrete output jacks (DVD MULTI IN):

If your DVD recorder or DVD player has analog 5.1 channel output jacks, use the connection below. When a DVD-Audio disc is played back, the original high-quality multi-channel sounds can be reproduced by using this connection.

Turn off all components before making connections.

• When you connect the components, refer also to their manuals.

Green

 

: signal flow

 

 

Component video cable (not supplied)

 

Blue

 

 

Red

 

 

Monaural audio cable (not supplied)

 

White

Stereo audio cable

DVD recorder or

 

(not supplied)

Red

DVD player

 

Monaural audio cable

 

(not supplied)

 

White

 

 

Red

 

 

Red

Stereo audio cable

 

(not supplied)

 

White

Composite video cable (not supplied)

S-video cable (not supplied)

Composite video cable (not supplied)

ÅTo left/right surround channel audio output

ıTo center channel audio output

ÇTo component video output

• Connect Y, PB, and PR correctly.

ÎTo subwoofer output

‰To left/right front channel audio output

ÏOnly for DVD recorder: To left/right front channel audio input

ÌTo composite video output

ÓTo S-video output

ÈOnly for DVD recorder: To S-video input

ÔOnly for DVD recorder: To composite video input

 

 

 

 

When you enjoy the sound recorded in DVD-Audio...

 

NOTES

 

You can enjoy the sound recorded in DVD-Audio with either

• When selecting “A MULTI” for the audio input setting and using

analog or digital methods.

 

the headphones, you can listen to the front channel sounds (left

– With analog method:

 

and right) only. The 3D HEADPHONE mode (see page 42) is not

1.Connect your DVD recorder or DVD player to this

 

available.

receiver according to the diagram above.

• When selecting “A MULTI” for the audio input setting or when

2.Select “A MULTI” for the audio input setting. (See page

 

multi-channel PCM signals (see page 41) are coming in with

 

selecting “HDMI” for the audio input setting, the following items

21.)

 

 

are not available:

– With digital method:

 

 

– Precise Surround Setup (see pages 16 to 19)

1.Connect your DVD recorder or DVD player and TV to this

 

 

– Decode mode (see page 22)

receiver with the HDMI cables. (See page 9.)

 

 

– CC Converter (see page 23)

2.Select “HDMI” for the audio input setting. (See page 21.)

 

 

– EX/ES/PLllx (see page 32)

 

 

– Dual Mono (see page 32)

 

 

– Subwoofer output (see page 33)

 

 

– Crossover frequency (see page 33)

 

 

– Low frequency effect attenuator (see page 33)

 

 

– Midnight mode (see page 33)

 

 

– Digital equalization patterns (see page 36)

 

 

– Bass Boost (see page 37)

 

 

– Input attenuator mode (see page 37)

 

 

– Sound parameters for Surround/DSP modes (see pages 37 and

 

38)

 

 

 

– Surround/DSP mode selection (see page 44)

 

• The audio delay level setting (see page 34) does not take effect

 

 

when selecting “A MULTI” for the audio input setting.

 

• When you enjoy the sound recorded in DVD-Audio through the

 

 

HDMI connection, use a DVD recorder or DVD player compatible

 

 

with HDMI version 1.1.

 

 

 

 

11