Basic operations

2Select the source to play

 

On the front panel:

 

Turn SOURCE SELECTOR until the source

 

name you want appears on the display.

 

The source lamp corresponding to the selected source lights

 

in red.

 

• As you turn SOURCE SELECTOR, the source changes as

 

follows:

 

1

 

 

 

 

2

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Source lamps

1

2

3

1Turn on the powerPress STANDBY/ON (or AUDIO on the remote control).

The standby lamp goes off and the current source lamp lights in red.

Current source name appears.

To turn off the power (into standby):

Press STANDBY/ON (or AUDIO on the remote control) again.

The standby lamp lights in red.

NOTES

•A small amount of power is consumed in standby mode. To turn the power off completely, unplug the AC power cord.

•Turning a source component on before turning the receiver on may cause a noise or interrupt the sound and picture. In this case, turn both the source component and the receiver off, then turn the receiver on before turning the source component on.

DVR/DVD Ô VCR Ô DBS Ô TV(SIRIUS)* Ô USB Ô XM Ô FM Ô AM Ô (Back to the beginning)

DVR/DVD:

Select this for the DVD recorder or DVD player.

VCR:

Select this for the VCR.

DBS:

Select this for the DBS tuner.

TV*:

Select this for the TV.

SIRIUS*:

Select this for the SIRIUS Satellite Radio.

USB:

Select this for the PC component.

XM:

Select this for the XM Satellite Radio.

FM:

Select this for the FM broadcast.

AM:

Select this for the AM broadcast.

From the remote control:Press one of the source selecting buttons.

•For “FM” and “AM,” press FM/AM.

Each time you press the button, the band alternates between “FM” and “AM.”

NOTE

When you connect a VCR or DBS to the HDMI VCR(DBS) IN terminal or COMPONENT VIDEO jacks on the rear of the receiver, you need to select either “VCR” or “DBS” for each terminal according to the component you connect (see page 34).

* Changing the source name of TV/SIRIUS inputOn the front panel ONLY:Press SET when “TV” is selected as the source.

•“ASSIGN SIRIUS” appears on the display for a while.

•To change the source name to “TV,” press SET when “SIRIUS” is selected as the source. “ASSIGN TV” appears on the display for a while.

20