7 Selecting the Surround/DSP modes
From the remote control:
1
2
1Select and play any source.
•Surround/DSP modes are not available when multi- channel PCM (see page 41) signals recorded in DVD- Audio are coming in. See page 11 for details.
•Make sure you have selected the audio input setting (analog or digital) correctly (see page 21).
2Press SURROUND repeatedly to select
the Surround/DSP mode you want.
Ex.: When “DOLBY DIGITAL” is selected for Dolby Digital
AUTO SURROUND*1 = Surround modes*2 = HALL1
=HALL2 = LIVE CLUB = DANCE CLUB = PAVILION
=THEATER1 = THEATER2 = MONO FILM*3 =
ALL CH STEREO*4 = SURROUND OFF = (Back to the beginning)
*1 “AUTO SURROUND” is the initial setting.
*2 Available Surround modes vary depending on the speaker settings and the incoming signals. For details, see page 42.
*3 If an incoming signal is a
*4 If “SURROUND SPK” is set to “NO,” “ALL CH STEREO” is not available.
To cancel Surround/DSP modes
Press SURROUND repeatedly so that “SURROUND OFF” appears on the display.
On the front panel:
| 2 | 1, 3 |
|
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Before you start, remember...
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.
1Select and play any source.
•Surround/DSP modes are not available when multi- channel PCM (see page 41) signals recorded in DVD- Audio are coming. See page 11 for details.
•Make sure you have selected the audio input setting (analog or digital) correctly (see page 21).
2Press SURROUND.
MULTI JOG now works for selecting Surround/DSP modes.
3Turn MULTI JOG to select the Surround/
DSP mode you want.
Ex.: When “DOLBY DIGITAL” is selected for Dolby Digital
AUTO SURROUND*1 Ô Surround modes*2 Ô HALL1
Ô HALL2 Ô LIVE CLUB Ô DANCE CLUB Ô PAVILION Ô THEATER1 Ô THEATER2 Ô MONO FILM*3 Ô ALL CH STEREO*4 Ô SURROUND OFF Ô (Back to the beginning)
*1 “AUTO SURROUND” is the initial setting.
*2 Available Surround modes vary depending on the speaker settings and the incoming signals. For details, see page 42.
*3 If an incoming signal is a
*4 If “SURROUND SPK” is set to “NO,” “ALL CH STEREO” is not available.
To cancel Surround/DSP modes
Turn MULTI JOG so that “SURROUND OFF” appears on the display.
44