1 Set the mode selector to “DVR.”
2 Press and hold DVR/DVD .
• Keep the button pressed until step 4 is finished.
3 Press DVR/DVD.
4 Enter the remote control code you want using the numeric buttons (1 – 4, 0).
EX.: To enter the code “2,” press 0, then 2.

7 DVD recorder or DVD player

To operate the DVD recorder, set the mode selector to “DVR.”

To operate the DVD player, set the mode selector to “DVD.”

After setting the mode selector correctly, you can perform

the following operations on the DVD recorder or DVD player.

See the manual supplied with the DVD recorder or DVD player for details.

To change the remote control code for DVD recorder

Some JVC DVD recorders can accept four types of control signals. You can assign one of the four codes to the remote control supplied for this receiver to operate your DVD recorder. For details, refer to the manual supplied with the DVD recorder.

Initial setting: 3

You can always perform the following operation:

DVR/DVD : Turn on or off the DVD recorder or DVD player.

After pressing DVR/DVD, you can perform the following operations on the DVD recorder and DVD player.

3:

Start playback.

7:

Stop playback.

 

 

8:

Pause playback. To release it, press 3.

 

 

¢:

Skip to the beginning of the next chapter.

 

 

4:

Return to the beginning of the current (or

 

previous) chapter.

 

 

¡:

Fast-forward playback.

 

 

1:

Fast-reverse playback.

 

TOP MENU/MENU: Display the menu recorded on discs.

 

 

5/∞/3/2:

Select an item on the menu screen.

 

 

SET:

Enter the selected item, channel number,

 

chapter/title number, or track number (if

 

required).

 

Only for DVD recorder operations:

 

 

CHANNEL +/–:

Change the TV channel numbers on the

 

DVD recorder.

 

 

1 – 9, 0:

Select a TV channel number (while

 

stopped) or a chapter/title number, track

 

number (while playing back). Press SET to

 

enter the number.

 

Only for DVD player operations:

 

 

1 – 10, 0, h10:

Select a chapter/title number, track

 

number, menu item, etc.

If these buttons do not function normally, use the remote control supplied with your DVD recorder or DVD player. Refer also to the manual supplied with the DVD recorder or DVD player for details.

Code for DVR

Number to enter

 

 

1

01

 

 

2

02

 

 

3

03

 

 

4

04

 

 

5Release DVR/DVD .

Now, the remote control code has been changed.

48