JVC RX-D412BUJ Press DBS, Press DVR/DVD, Release DVR/DVD, Release DBS/CATV, pressing DVR/DVD, Press and hold DVR/DVD, Press and hold DBS/CATV

Now, you can perform the following operations on the DVD player:

Now, you can perform the following operation on the CATV converter or DBS tuner:

5 Release DVR/DVD .

4 Release DBS/CATV .

See “Manufacturer codes for DVD player” below.

See “Manufacturer codes for CATV converter” or “Manufacturer codes for DBS tuner” below.

• Keep the button pressed until step 4 is finished.

3 Press DVR/DVD.

4 Enter the manufacturer code using the numeric buttons (1 – 9, 0).

• Keep the button pressed until step 3 is finished.

2 Press DBS.

3 Enter the manufacturer code using the numeric buttons (1 – 9, 0).

1 Set the mode selector to “DVD.”

2 Press and hold DVR/DVD .

1 Press and hold DBS/CATV .

player

converter or DBS tuner

To change the transmittable signals for operating a DVD

To change the transmittable signals for operating a CATV

DBS/CATV : Turn on or off the CATV converter or DBS tuner.

After pressing DBS, you can perform the following operations on the CATV converter or DBS tuner:

CHANNEL +/–:Change the channel numbers on the CATV converter or DBS tuner.

1 – 10, 0: Select the channel numbers on the CATV converter or DBS tuner.

See the manual supplied with the CATV converter or DBS tuner for details.

5Try to operate your CATV converter orDBS tuner by pressing DBS/CATV .

When your CATV converter or DBS tuner turns on or off, you have entered the correct code.

If more than one code is listed for your brand of CATV converter or DBS tuner, try each one until the correct one is

entered.

Manufacturer codes for CATV converter:

Manufacturer	Codes
G.I.	01
Gemini	02
Hamlin	03, 04, 05, 06
Jerrold	07, 08, 09, 10, 11, 12, 13, 14, 15
Macom	16, 17, 18
Magnavox	19
Oak	20, 21, 22
Panasonic	23, 24
Philips	25, 26, 27, 28, 29, 30
Pioneer	31, 32
S. Atlanta	33, 34, 35
Samsung	36
Tocom	37
Zenith	38, 39
Manufacturer codes for DBS tuner:

Manufacturer	Codes
Echostar	40
G.I.	41
Hitachi	42
Hughes	43
Panasonic	44
Primestar	45
RCA	46
Sony	47
Toshiba	48

Initial setting: 01

DVR/DVD :	Turn on or off the DVD player.
3:	Start playback.
¢:	Skip to the beginning of the next
	chapter (or fast-forward for some
	models).
4:	Return to the beginning of the
	current chapter (or fast-reverse for
	some models).
7:	Stop playback.
8:	Pause playback. To release it, press 3.
MENU:	Display the menu recorded on DVD
	VIDEO discs.
5/∞/3/2:	Select an item on the menu screen.
SET:	Enter the selected item.
1 – 9, 0, h10:	Select the chapter number.

See the manual supplied with the DVD player for details.

6Try to operate your DVD player bypressing DVR/DVD .

Your DVD player turns on or off when you have entered the correct code.

Manufacturer codes for DVD player:

Initial setting: 01

NOTE

You cannot use this remote control to operate any manufacturers’ DVD recorders other than JVC’s.

Manufacturer codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.