| PROBLEM | POSSIBLE CAUSE | SOLUTION |
| The remote control does not | The remote control is not ready for your | Set the mode selector correctly, then |
control | operate as you intend. | intended operation. | press the corresponding source selecting |
|
| button before operation. | |
|
|
| |
The remote control does not | There is an obstruction blocking the | Remove the obstruction. | |
Remote | work. | remote sensor on the receiver. |
|
|
|
| |
| Batteries are weak. | Replace batteries. | |
|
|
| |
| The mode selector is set to the incorrect | Set the mode selector to the proper | |
|
| ||
|
| position. | position. |
|
|
|
|
| Continuous hiss or buzzing | Incoming signal is too weak. | Connect an outdoor FM antenna (not |
| during FM reception. |
| supplied) after unplugging the power |
|
|
| cord, or contact your dealer. |
|
|
|
|
FM/AM |
| The station is too far away. | Select another station. |
|
|
| |
| A wrong antenna is being used. | Check with your dealer to be sure you | |
|
| have the correct antenna. | |
|
|
|
|
|
| Antennas are not connected properly. | Check the connections. |
|
|
|
|
| Occasional cracking noise during | Ignition noise from automobiles. | Move the antenna farther from |
| FM reception. |
| automobile traffic. |
|
|
|
|
53