JVC SP-PWV70 Connections, Connecting a TV, To connect a TV with the component video input jacks

Connections

•Do not connect the AC power cord until all other connections have been made.

•Since different components often have different terminal names, carefully read the instructions supplied with the component you are going to connect.

Connecting a TV

To view pictures and on-screen displays, connect a TV to the center unit.

•Connecting to a TV through a VCR, or to a TV with a built-in VCR, may cause distortion of picture.

•You need to set “MONITOR TYPE” in the PICTURE menu correctly according to the aspect ratio of your TV. See page 58.

7 To connect a TV without the component video input jacks

TO SP-PWV70	AUX IN		DIGITAL IN
				AV
				COMPU
	R	L	OPTICAL	LINK
FM 75	AM LOOP			VIDEO	VIDEO OUT
				S-VIDEO
		ANTENNA		Y	COMPONENT	PR
					PB
COAXIAL	AM EXT
H	V	PAL	NTSC			AC IN
DISP.SET		VIDEO OUT SELECT

Center unit

TV

VIDEO

S-VIDEO

PAL NTSC

VIDEO OUT SELECT

Set the VIDEO OUT SELECT switch correctly. (See below.)

To composite video input Video cord (supplied)

S-video cord (not supplied)

To S-video input

If your TV has S-video (Y/C-separation) jack, connect it using an S-video cord.

By using this jack, you can get a better picture quality than using composite video connection.

• Connect S-video cord by matching the ∞ mark on the plug to the one on the system.

7To connect a TV with the component video input jacks

If your TV has the component video input jacks, connect it with the component video cord (not supplied) to view a high quality picture.

•Connect “Y” to “Y,” “PB” to “PB,” and “PR” to “PR” correctly.

•If your TV supports the progressive video input, you can enjoy a high quality picture by making the progressive scan mode active. See page 26.

TO SP-PWV70	AUX IN		DIGITAL IN
				AV
				COMPU
	R	L	OPTICAL	LINK
FM 75	AM LOOP			VIDEO	VIDEO OUT
				S-VIDEO
		ANTENNA		Y	COMPONENT	PR
					PB
COAXIAL	AM EXT
H	V	PAL	NTSC			AC IN
DISP.SET		VIDEO OUT SELECT

NOTE:

If the component video input jacks of your TV are of the BNC type, use a plug adapter to convert the pin plugs to BNC plugs (not supplied).

TV

PAL NTSC

COMPONENT

Y PBPR

Center unit

Red

VIDEO OUT SELECT

Set the VIDEO OUT SELECT switch correctly. (See below.)

Blue

Component video cord (not supplied)

Green

To component video input

7Selecting the color system

The center unit is compatible with the PAL and NTSC systems. Set the VIDEO OUT SELECT switch on
the rear panel in standby mode to match the color system of your TV. Make sure that the color system
of a DVD, Video CD, or SVCD disc labeled on the package matches your TV.
• If you use a multi-system TV, by setting “MONITOR TYPE” in the PICTURE menu to an appropriate	PAL	NTSC
“MULTI” option, the system outputs a video signal by the same format recorded on the disc (i.e. if	VIDEO OUT SELECT
you play an NTSC disc, the system outputs a signal by the NTSC format) regardless of the VIDEO
OUT SELECT switch setting. See page 58.

10