Basic operations, Turning on/off the system

Basic operations

This section mainly explains operations commonly used when you enjoy this system.

•This manual mainly explains operations when the center unit is placed vertically (the DISP.SET selector is set to “V”) as an example.

•Turn also on your TV and select the correct input mode on the TV.

IMPORTANT:

	When using the remote control, check to see if its	AUDIO/
		TV/VCR
	remote control mode selector is set to the correct
		CATV/DBS
	position:

To operate this system, set it to “AUDIO/TV/VCR.”

AUDIO button

Source selecting buttons

VOLUME +/– buttons

From the remote control: On the center unit:

•When you place the center unit vertically: The moving panel stands up.

The illumination lamps and the button name indicators light up, and the current source name appears on the display window.

The illumination lamps and the button name indicators light up, and the current source name appears on the display window.

•When DVD, AUX, or AUX DIGITAL is selected as the source (see page 22), the opening screen* appears on the TV screen.

* Opening screen

NOW READING

Message area

The following messages may appear in the message area depending on the status of this system.

• “LOADING”/“EJECT”:	Appears when inserting or removing a disc.
• “NOW READING”:	Appears when the system is reading the disc information.

•“REGION CODE ERROR!”: Appears when the region code of the DVD does not match the system.

The DVD cannot be played back.

• “NO DISC”:

Appears when no disc is inserted.