JVC SP-XSV70 Getting Started, Connecting the FM and AM antennas, AM loop antenna, FM antenna

Getting Started

Connecting the FM and AM antennas

•Make sure the antenna conductors do not touch any other terminals, connecting cords, and power cords. This could cause poor reception.

7AM loop antenna

Setting up AM loop antenna

Attach the AM loop to its base by snapping the tabs on the loop into the slot in the base.

If the antenna cord is covered with vinyl, remove the vinyl by twisting it as shown.

Outdoor single vinyl-covered wire (not supplied)

If reception is poor:	AM loop antenna
Connect an outdoor single vinyl-
covered wire to the AM EXT
terminal. (Keep the AM loop
antenna connected.)	Wire

Connecting AM loop antenna

1

Press and hold the terminal clamp.

2

Insert the antenna cord.

3	Release the finger from
	the clamp.

•Turn the loop until you have the best reception.

Center unit

7FM antenna

TO SP-PWV70	AUX IN		DIGITAL IN
				AV
				COMPU
	R	L	OPTICAL	LINK
FM 75	AM LOOP			VIDEO	VIDEO OUT
				S-VIDEO
		ANTENNA		Y	COMPONENT	PR
					PB
COAXIAL	AM EXT
H	V	PAL	NTSC			AC IN
DISP.SET		VIDEO OUT SELECT

Connecting the supplied FM antenna

Extend the supplied FM antenna horizontally.

If reception is poor:

Outdoor FM antenna (not supplied)

Connect an outdoor FM antenna with the standard type (coaxial) connecter.

Outdoor FM antenna cord (not supplied)

NOTES:

•Disconnect the supplied FM Antenna before attaching a 75 Ω coaxial connector (the kind with a round wire going to an outdoor antenna).

•We recommend that you use a coaxial cable to the FM antenna, since it is well-shielded against interference.

11