Using the remote control for VCR, For operating your VCR

Using the remote control for VCR

1Slide the remote control mode selector to ”AUDIO/TV/VCR.”

Keep it pressed until step 4 is finished.

TV AUDIO

–SOUND

4Press Number buttons (1-9, 0) to enter a manufacturer’s code (2 digit).

See the list below to find the code.

REC	STOP	PAUSE
MEMORY		STROBE

DIMMER

PAUSE button

STOP button ÷ REC button

RM–STHV70U

DVD CINEMA SYSTEM

Examples: For a Philips VCR, press 0, then 9.

For an NEC VCR, press 2, then 5.

6Try to operate your VCR by pressing VCR .

When your VCR turns on or off, you have entered the correct code.

If there are more than one cord listed for your brand of VCR, try each one

until you enter the correct one.

Manufacturers’ codes for VCR

You can use the following buttons for operating your VCR:

IMPORTANT:

	When using the remote control, check to see if its	AUDIO/
	When using the remote control, check to see if its	TV/VCR
	remote control mode selector is set to the correct	CATV/DBS
	position:	CATV/DBS
	position:

To operate VCR, set it to “AUDIO/TV/VCR.”

VCR :Turns on and off the VCR.

•After pressing VCR CONTROL, you can use the following buttons for operating your VCR:

÷REC:Press this button together with PLAY to start recording. Press this button together with PAUSE to pause

recording.

CHANNEL +/–: Changes the TV channels on the VCR.