JVC SP-XSV70 manual Creating the realistic sound fields, Selecting the surround mode, Press SOUND

Creating the realistic sound fields

IMPORTANT:

When using the remote control, check to see if its	AUDIO/
	TV/VCR
remote control mode selector is set to the correct	CATV/DBS
position:

To operate this system, set it to “AUDIO/TV/VCR.”

Using Dolby Pro Logic II, Dolby Digital and DTS Digital Surround

Once you have adjusted the sound, the adjustment is memorized for each source.

Selecting the surround mode

The system is so set up in its initial state that it automatically selects the optimal surround mode for each input signal

(AUTO SURROUND MODE).

Only when you want to change a surround mode selected automatically, perform the following procedure.

•After having changed the surround mode, turning off the power or changing sources resumes the auto surround mode.

From the remote control ONLY:

TV RETURN FM MODE	100+
ON
SCREEN	AUDIO/
	TV/VCR
	CATV/DBS	SURROUND
ENTER	SURROUND
CHOICE	MODE

MODE button

Press SURROUND MODE.

The current surround mode is called up and appears on the display window.

Each time you press the button, the surround mode changes as follows.

]PL II MOVIE ] PL II MUSIC ] LIVE CLUB

]DANCE CLUB ] HALL ] PAVILION

]ALL CH ST. ] STEREO (surround off)

](back to the beginning)

NOTES:

•When you have set the rear speakers to “NONE,” you cannot use the DAP modes and All Channel Stereo. (See pages 60 and 66.)

•When the digital multichannel software such as Dolby Digital or DTS Digital Surround is played back, the appropriate multichannel Surround mode is automatically activated (“DOLBY D” or “DTS SURR”), and you can only turn on or off (“STEREO”) the surround mode.

•For Dolby Digital 2 channel software, you can select “PLII MUSIC,” “PLII MOVIE,” or off (“STEREO”) by pressing SURROUND MODE.

From the remote control ONLY:

	TOP MENU	MENU		ZOOM		PROGRESSIVE	SOUND
					–	SOUND
	CONTROL	– SUBWOOFER +				EFFECT	button
	VCR	1			2	3
		–	CENTER		+	TEST	TEST
Sound setting	TV	4			5	6
	SLEEP	–	REAR-L		+		button
buttons		7			8	9
	SETTING	–	REAR-R		+
		10			0	+10
	TV RETURN			FM MODE		100+
	ON
	SCREEN					AUDIO/
						TV/VCR
						CATV/DBS
			ENTER			SURROUND
	CHOICE					MODE

SURROUND

MODE button

1 Start playing back software.

When playing a conponent connected to the AUX IN or the DIGITAL IN jack, change the source to AUX or AUX DIGITAL. (See page 22.)

2Press SURROUND MODE to activate Surround mode.

Each time you press the button, Surround mode turns on and off (stereo) alternately.

•If you are playing back software encoded with Dolby Digital multichannel, “DOLBY D” is selected.

•If you are playing back software encoded with DTS Digital Surround, “DTS SURR” is selected.

•If you are playing back any software other than the above, you can select “PL II MUSIC” or “PL II MOVIE” according to the source by pressing SURROUND MODE.

If you like to adjust sound, go to step 3.

3 Press SOUND.

The 10 keys are activated for sound adjustments.

4Press TEST to check if you can hear the sounds through all the speakers at the equal level.

“TEST TONE L” and the corresponding signal indicator starts flashing on the display window, and the test tone comes out of the speakers in the following order:

L

]Left front speaker ] Center speaker ] Right front speaker ] Right rear speaker ] Left rear speaker

](back to the beginning)

35