When Programs Overlap Each Other
DVD TIMER (#)
VCR/DVD
CANCEL PROG/CHECK
1 | 2 | 3 | 1 |
4 | 5 | 6 |
|
7 | 8 | 9 |
|
| 0 |
|
|
If “PROGRAM OVERLAPPED” appears, you have another program overlapping the program you have just made. Confirm with the arrow on “OK”, then press PROG/CHECK. Program Check screen appears and conflicting programs will be highlighted in pink.
ENTER | rtw e |
|
Check, Cancel And Change Programs
1 When the DVD timer indicator lights on the front display panelPress DVD TIMER (#), then press 1.
When “ ” and the DVD timer indicator light on the front display panel.Press 1.
When the DVD lamp does not light up on the unitPress VCR/DVD repeatedly so that the DVD lamp lights up on the unit.
2 Press PROG/CHECK to access the Program Check screen.● To return to the previous screen after you check the program, press PROG/CHECK again.
To cancel the programPress rt to select a program to be cancelled, then press
CANCEL.3 Press rt to select the program, then press ENTER. The program screen appears.
4 Change the settings of the desired recording options as required.
●Refer to steps 5 – 10 in “Manual Timer Programming” ( pg. 39).
Example: Program 3 (you have just made) and Program 4 overlap each other.
1 Confirm the overlapping programs. Overlapping programs appear on the TV screen.
NOTE:
If you do not mind this overlap, press PROG/CHECK to finish the timer
program setting. The program with the lower program number will be recorded and the other one will not be recorded correctly. If no changes are made for approximately 1 minute, the unit will return to the normal screen.
2 Press rt to select the desired program to be cancelled or changed.
To cancel the program
Press CANCEL.
●“THE TIMER PROGRAMING SETTING WAS CANCELLED” appears on the TV screen for about 5 seconds, then the normal screen resumes.
To change the program settingPress ENTER, then go to step 3.
3 Change the program setting.
●Refer to steps 5 – 10 in “Manual Timer Programming” ( pg. 39).
4 Press PROG/CHECK to check if the conflict has been settled. Program check screen appears.
5 Engage the unit’s timer mode.
●Refer to step 6 in “Check, Cancel And Change Programs” ( pg. 42).
NOTE:
When any overlaps remain after deletion and modification of programs, Program Check screen remains showing the conflicting programs. In such a case, repeat the procedure above until the conflict is solved.
5 Press PROG/CHECK to complete timer correction. The previous screen resumes.
6Press DVD TIMER (#).●The DVD timer indicator also lights up on the front display panel and the VCR deck is automatically selected. When the VCR deck is in timer standby mode, the unit is automatically turned off.
Program’s information on the front display panelYou can check the details of the programs even when the power is turned off. (It is necessary that the Power Save mode
( pg. 70) is disengaged or the unit is not in timer standby mode.) However, it is not possible to cancel or change the program’s setting.
APress PROG/CHECK.●“NEW PROG” or
BPress rt until the desired program number
C Press e.
● Each time you press e, the indication changes as follows (the settings in parentheses are examples):
Date (“DATE 03.08SU”) ] Start time (“ON 11:00”) ] Stop time (“OFF 11:30”) ] Channel (“CH 1”) ] Weekly/Daily
D Press PROG/CHECK to complete checking.
● The normal display resumes.