Basic Recording
●Turn on the unit.
●Turn on the TV and select the video channel (or AV mode).
●Slide the TV/CABLE/DBS/DVD switch to DVD.
VCR/DVD REC MODE
Recording Features
●Turn on the unit.
●Turn on the TV and select the video channel (or AV mode).
●Slide the TV/CABLE/DBS/DVD switch to DVD.
●Press VCR/DVD repeatedly so that the VCR lamp lights up on the unit.
VCR/DVD
CH +/– |
|
| 8 4 97 |
VCR/DVD |
|
|
|
1 | 2 | 3 |
|
4 | 5 | 6 | 0 – 9 |
7 | 8 | 9 | |
| 0 |
|
|
4
8 9
REC MODE | 7 |
CH +/–
1 Load a cassette with the record safety tab intact. If not, set “REC SAFETY” to “OFF” ( pg. 73).
●The unit’s power comes on automatically and the counter is reset to 0:00:00.
2 Press VCR/DVD repeatedly so that the VCR lamp lights up on the unit.
3 Press CH +/– or the number keys to select the channel you wish to record.
4 Press REC MODE repeatedly to set the recording mode.
5 Press 7 on the unit to start recording. Or while holding 7, press 4 on the remote control.
●The VCR recording lamp lights up on the unit.
Video Calibration takes place at the beginning of both the first SP and the first EP recording after inserting the cassette.
6 Press 9 to pause recording.
●You can select channel during the Record Pause mode.
●To resume recording, press 4.
7 Press 8 to stop recording.
●The VCR recording lamp lights off on the unit.
Recording Resume Function
If there is a power outage during recording or timer recording
( pg. 46, 48, 49), the recording will resume automatically when power is restored to the unit unless the unit’s memory backup has expired.
|
| 8 | 7 |
VCR/DVD |
|
|
|
1 | 2 | 3 |
|
4 | 5 | 6 |
|
7 | 8 | 9 |
|
CANCEL | 0 | |
DISPLAY | ||
| ||
| 4 | |
8 |
| |
| 7 | |
TV/VCR | CH +/– | |
|
Watch Another Program While Recording On The Unit
While recording is going on, you can watch another program on the TV by using the TV’s tuner.
NOTE:
It is required that the remote control is set to be able to operate the TV in advance. ( pg. 66)
1 During recording, press TV/VCR to select TV mode if your unit is connected to the TV via the RF connection.
●VCR mode is disengaged, then the VIDEO indicator lights off and “TV” appears on the front display panel.
VIDEO indicator lights off.
●The program received on the TV’s tuner is displayed on the TV screen.
2Slide the TV/CABLE/DBS/DVD switch to TV.
3Press CH +/– repeatedly to select the desired channel.
Accidental erasure prevention To prevent accidental recording on a recorded cassette, remove its safety tab and set “REC SAFETY” to “ON” ( pg. 73). To record on it later, cover the hole with adhesive tape or set “REC SAFETY” to “OFF”.
Record safety tab