Remote Control Functions
Remote control 1/2/3/4 Code Switching
The remote control is capable of controlling four JVC video units independently. Each of the units can respond to one of four codes (1, 2, 3 or 4). The remote control is preset to send 3 code signals because your unit is initially set to respond to 3 code signals. You can easily modify your unit to respond to 1, 2 or 4 code signals.
Slide the TV/CABLE/DBS/DVD switch to DVD.
1 | 2 | 3 | 1 | |
4 | 5 | 6 | ||
0 – 9 | ||||
7 | 8 | 9 | ||
| 0 |
|
|
ENTER
SET UP
TV/VCR | TV VOL. |
| |
| CH +/– |
14
1 | 2 | 3 | 1 – 4 |
4 | 5 | 6 | |
7 | 8 | 9 |
|
| 0 |
|
|
ENTER
SET UP
8
●Keep pressing SET UP down during step 1.
1 Press the number key “1” for 1, “2” for 2, “3” for 3 or “4” for 4 to change the remote control code, then press ENTER.
2
3 Press 4 on the unit for over 5 seconds while the unit is turned off. The code currently set appears on the front display panel.
4 Press 8 on the remote control to change the unit’s code. The code currently set on the remote control blinks on the front display panel for approximately 5 seconds, and is applied to the unit.
NOTE:
When “POWER SAVE” is set to “ON” ( pg. 70), it is not possible to change the remote code.
TV Multi-Brand Remote Control
Your remote control can operate the basic functions of your TV set. In addition to JVC TVs, other manufacturer’s TVs can also be controlled.
●Turn off the TV using its remote control.
●Slide the TV/CABLE/DBS/DVD switch to TV.
IMPORTANT:
Although the supplied remote control unit is compatible with JVC televisions, as well as many other models, it may not work with your TV, or in some instances, may have limited function capability.
●Keep pressing SET UP down during step 1.
1 Enter your TV’s brand code using the number keys, then press
ENTER.
2 Press 1 on the unit’s remote control to turn on the TV and try operations ( step 3).
●Once you have set the remote control to operate the TV, you do not have to repeat this step until you replace your remote control’s batteries.
●Some brands of TVs have more than one code. If the TV does not function with one code, try entering another.
3Press the corresponding button to operate the TV: 1, TV/VCR,
CH
(TV Muting), number keys.● For some brands of TVs, you must press ENTER after having pressed the number keys.
| BRAND NAME | CODE |
|
|
JVC | 01, 03 |
HITACHI | 10 |
MAGNAVOX | 02 |
MITSUBISHI | 03 |
PANASONIC | 04, 11 |
RCA | 05 |
SHARP | 06 |
SONY | 07 |
SAMSUNG | 12 |
SANYO | 13 |
SEARS | 13 |
TOSHIBA | 08 |
ZENITH | 09 |
|
|