JVC SR-MV40U Digital Audio Dubbing, Example: Dubbing to an MD

						EDITING EN 65
		Digital Audio Dubbing				1 Connect the unit and a digital audio device using either an
						optional optical cable or an optional coaxial cable.
						2 Place a disc on the unit and load an MD on the connected digital
You can dub selected audio from a DVD or Audio CD disc to a
						audio device.
digital audio device.
						3 Select the audio to be dubbed.
However, it is not possible to dub copy-protected discs.
						4 Start playback slightly before the actual point from where you
● Turn on the TV and select the video channel (or AV mode).						wish to start dubbing.
● Slide the TV/CABLE/DBS/DVD switch to DVD.						5 Press 9 to pause playback.
Example: Dubbing to an MD						6 Select the input mode on the connected digital audio device.
				Recorder		7 Press 4 to start playback on the unit.
						8 Start recording on the digital audio device.
						9 Stop recording on the digital audio device. Then press 8 to stop
						playback on the unit.
						NOTE:
						There may be a discrepancy of several seconds between where you
				Digital audio device		intend editing to start, and where it actually starts.
				(MD deck, etc.)
			Optical cable	Coaxial cable
			(not supplied)	(not supplied)
			To [DIGITAL AUDIO	To [DIGITAL AUDIO OUT
	Player		OUT (OPTICAL)]		(COAXIAL)]

.

Rear of unit

Note for connection:

Remove the protection cap from the cable.