86 EN SPECIFICATIONS

GENERAL

Power requirement

AC 120 Vd, 60 Hz

Power consumption

Power on: 55 W

Power off: 13.7 W

Temperature

Operating: 5°C to 35°C (41°F to 95°F)

Storage: –20°C to 60°C (–4°F to140°F)

Operating position

Horizontal only

Dimensions (WxHxD)

435mm x 96 mm x 343 mm (17-3/16" x 3-13/16" x 13-1/2")

Weight

6.2 kg (13.7 lbs)

Input/Output S-video input:

Y:0.8 – 1.2 Vp-p, 75 ohms

C:0.2 – 0.4 Vp-p, 75 ohms S-video output:

Y:1.0 Vp-p, 75 ohms

C:0.3 Vp-p, 75 ohms

Video input: 0.5 – 2.0 Vp-p, 75 ohms (pin jack)

Video output: 1.0 Vp-p, 75 ohms (pin jack x1, BNC x 1) Audio input:

–8 dB, 50 kohms (pin jack) Corresponding to mono (left)

Audio output: –8 dB, 1 kohms (pin jack)

i.Link: 4-pin for DV input Component video output:

Y:1.0 Vp-p, 75 ohms

CB/CR, PB/PR: 0.7 Vp-p, 75 ohms

Corresponding to copy protection Remote Input: R3.5 mm

Digital audio output: Optical, Coaxial

Corresponding to Dolby Digital and DTS Digital Surround Bit stream

Selectable in digital audio output setting menu

VIDEO/AUDIO (DVD Deck)

Recording format

DVD-RAM: DVD Video Recording format

DVD-R: DVD-Video format

DVD-RW: DVD-Video format, DVD Video Recording format

Recording time

Maximum 8 hours (with 4.7 GB disc) (XP): Approx. 1 hour

(SP): Approx. 2 hours

(LP): Approx. 4 hours

(EP): Approx. 6 hours

(FR): Approx. 1 hour – 8 hours

Audio recording system

Dolby Digital (2 ch)

Linear PCM (XP mode only)

Video recording compression system

MPEG2 (CBR/VBR)

VIDEO/AUDIO (VCR Deck)

Signal system

NTSC color signal and EIA monochrome signal, 525 lines/60 fields

Recording system

DA4 (Double Azimuth) head helical scan system

Format

S-VHS/VHS NTSC standard

Maximum recording time

(SP): 210 min. with ST-210 video cassette

(EP): 630 min. with ST-210 video cassette

Signal-to-noise ratio

45 dB

Horizontal resolution

230lines

Frequency range

(Normal audio): 70 Hz to 10,000 Hz

(Hi-Fi audio): 20 Hz to 20,000 Hz

Specifications shown are for SP mode unless otherwise specified.

TUNER/TIMER

Tuning system

Frequency synthesized tuner

Channel coverage

VHF: Channels 2 – 13

UHF: Channels 14 – 69

CATV: 113 Channels

RF output

Channel 3 or 4 (switchable; preset to Channel 3 when shipped) 75 ohms, unbalanced

Memory backup time

Approx. 5 seconds

ACCESSORIES

Provided accessories

RF cable,

Audio cable, S-video cable,

Infrared remote control unit, “AA” battery x 2

E.& O.E. Design and specifications subject to change without notice.

ATTENTION:

This unit contains microcomputers. External electronic noise or interference could cause malfunctioning. In such cases, switch the unit off and unplug the mains power cord. Then plug it in again and turn the unit on. Take out the disc. After checking the disc, operate the unit as usual.