OPERATIONS ON DVD DECK EN 39

 

 

 

Manual Timer Programming

9 Set the other recording options as required.

 

 

 

 

 

 

 

● Refer to step 6 in “VCR Plus+ Timer Programming” ( pg. 38).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10 Press ENTER to access the Program Confirmation screen.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11 Press ENTER to complete timer programming.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

● To program another timer, repeat steps 3 – 11.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12 Press DVD TIMER (#) to engage the unit’s timer mode. The

You can program this unit to timer record as many as 8 programs.

DVD timer indicator lights up on the front display panel and the

If you do not know the PlusCode number for the program you wish

VCR deck is automatically selected. When the VCR deck is in

to record, use the following procedure to set your unit to timer

timer standby mode, the unit is automatically turned off.

record the program.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

● To disengage the timer mode, press DVD TIMER (#) again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTES:

 

● Make sure that the unit’s built-in clock is set properly.

 

● Turn on the unit.

 

 

 

 

 

 

 

 

 

 

 

 

 

● When two successive programs are recorded on a DVD-RW disc with

 

● Turn on the TV and select the video channel (or AV mode).

Manual Timer programming function, the beginning of the second

 

● Slide the TV/CABLE/DBS/DVD switch to DVD.

one may be left off the recording.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

● If the copy limited program is received during timer recording, the unit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

enters Record Pause mode. Recording starts again if it is switched to

 

 

 

 

 

DVD TIMER (#)

 

 

 

 

 

 

 

 

 

 

 

 

 

a recordable broadcast during the time you programmed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VCR/DVD

1

2

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

4

5

6

 

 

 

 

 

 

 

 

7

8

9

 

 

 

 

 

 

 

 

 

 

 

 

 

PROG/CHECK

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ENTER

rtw e

 

1 Load a recordable disc.

2 Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit.

3 Press PROG/CHECK to access the Program Check screen.

●When “PROGRAM FULL DELETE

UNWANTED TIMER PROGRAM” appears on the TV screen, you need to cancel some of the reserved programs. ( pg. 42)

4 Press rt to select “NEW TIMER PROGRAM”, then press ENTER. The program screen appears.

5 Press rt to set the desired date.

● The current date appears on the TV screen. The date you enter appears in its place.

6 Press w e to select “START”, then press rt to set the desired start time.

●Each press of rt increases/decreases the start time in 1-minute intervals.

●To increase/decrease the start time in 30-minute intervals, press and hold rt.

7 Press w e to select “STOP”, then press rt to set the desired stop time.

●Each press of rt increases/decreases the stop time in 1-minute intervals.

●To increase/decrease the stop time in 30-minute intervals, press and hold rt.

8 Press w e to select “CH”, then press rt to select the desired channel.