JVC SR-MV40U Manual Dubbing (From DVD To VCR), Dubbing A Part Of A Disc, VCR, DVD, DUBB, VCR/DVD, VCR/DVD, REC MODE, VCR/ DVD, EDITING EN, For VCR deck, 1 For DVD deck

		EDITING EN 61
	Manual Dubbing (From DVD To VCR)	1 For DVD deck
		Load a disc you want to dub.
		For VCR deck
Dubbing A Part Of A Disc
		Load a cassette with the record safety tab intact.
		2 Press VCR}DVD to select the dubbing direction.
You can dub the selected scenes on a tape to the DVD disc,
starting and stopping wherever you wish.		3 Prepare the DVD deck for dubbing.
		A Press VCR/DVD repeatedly so that the DVD lamp lights up on
● Turn on the unit.		the unit.
● Turn on the TV and select the video channel (or AV mode).		B Locate the point from where you want to start dubbing, then
● Slide the TV/CABLE/DBS/DVD switch to DVD.		pause playback by pressing the following buttons: 4, 5, 3,
		8, 9

REC

VCR/DVD MODE DUBB. VCR } DVD

DUBB. Lamp		83 U 597
VCR/DVD
1	2	3
4	5	6

7 8 9

0

PROGRESSIVE SCAN

4

3 5

8 9

REC MODE

7

4 Prepare the VCR deck for dubbing.

APress VCR/DVD repeatedly so that the VCR lamp lights up on the unit.

B Press REC MODE repeatedly to set the recording mode.

C Press 7 and 9 simultaneously so that the VCR deck enters the Record Pause mode.

5 Press and hold DUBB. for more than 2 seconds to start the dubbing. The dubbing (DUBB.) lamp lights up on the unit.

6 Press 8 to stop recording on the VCR deck. Then press VCR/ DVD, and press 8 to stop playback on the DVD deck.

NOTES:

●It is not possible to start dubbing if the unit retains a memory of the resume points. Press 8 twice to clear the resume points.

●There may be a discrepancy of several seconds between where you intend dubbing to start, and where it actually starts.

●The superimposed indication during the operation or dubbing is not recorded.

●When the end of the tape is reached during dubbing, the tape is ejected and both deck stops.

●When the progressive mode is set, “}DVD” does not light up on the

front display panel. Press PROGRESSIVE SCAN so that video output indicator () lights off on the front display panel.

●It is not possible to perform other operations like Live Memory Playback. Check the recorded program on the disc after dubbing.