JVC SR-MV40U Simulated Surround Effect, Time Search, Adjusting The Picture Quality, “5”, “5”, ENTER, CLEAR, ENTER, ENTER, ENTER, ENTER, ENTER, ENTER, CLEAR, ENTER, ENTER

	OPERATIONS ON DVD DECK EN 33
4 Press the number keys to enter the desired item number, then	Simulated Surround Effect
press ENTER.

●Playback starts from the selected section.

Examples:
A To select track 5, press the number key “5”.	It is possible to get a simulated surround effect from your stereo
B To select track 15, press the number key “1” and “5”.
	system. You can enjoy the virtual surround sound with your
C To select track 25, press the number key “2”, then “5”.
	2-channel stereo system.
If you have specified a wrong selection
	1 Press ON SCREEN twice to access the on-screen bar.
Press CANCEL or CLEAR (8) to clear the wrong number, then
	2 Press w e to select “	”, then press ENTER.
enter the correct one before you press ENTER in this step.
To clear the on-screen bar	● “3D-ON” appears above the selected item and Simulated Surround
	Effect is activated.
Press ON SCREEN.
	● Each time you press ENTER, “3D-ON” appears and disappears
NOTES:
	alternately.

●When “X” is displayed on the TV screen in step 4, the chapter you have selected is not contained in the disc, or chapter search does not

	work on the disc.
● Before you press ENTER, playback may start automatically when
	you enter the section’s number depending on the disc.				To clear the on-screen bar
● This function is not possible for a Video CD with PBC function.
Time Search					Press ON SCREEN.
					To cancel the simulated surround effect
					Press ENTER to clear “3D-ON” from the screen.
					NOTES:
					● The simulated surround effect works correctly only when playing
You can play back a disc from the desired point by specifying the
					back a title recorded in multichannels.
elapsed playing time from the beginning of a title (DVD-RAM,					● Simulated Surround Effect does not affect the DVD VIDEO bitstream
DVD-R, DVD-RW and DVD VIDEO) or a disc (Video CD and Audio					signal from the [DIGITAL AUDIO OUTPUT] connector.
CD).					● When Simulated Surround Effect is activated, the settings of
1 Press ON SCREEN twice to access the on-screen bar.					“ANALOG AUDIO OUT” and “D. RANGE CONTROL” are disabled.
					( pg. 69)
2 Press w e to select “			”, then press ENTER. The pop-up
					Adjusting The Picture Quality
window appears under the selected item.
3 Press the number keys to enter the time, then press ENTER.					You can obtain optimal picture quality by selecting an appropriate
					picture mode.
Playback starts from the specified time.					1 Press ON SCREEN twice to access the on-screen bar.
Example:					2 Press w e to select “	”, then press ENTER. The pop-up
To play back from a point 12 (minutes): 50 (seconds) elapsed.					window appears under the selected item.
		Press 1		Press 2

Press 5 Press 0

If you have specified a wrong selection,

Press CANCEL (for the last entered number) or CLEAR (8) (for whole numbers) to clear the wrong number, then enter the correct one(s) before you press ENTER in this step.

To clear the on-screen bar

Press ON SCREEN.

NOTES:

●When “X” is displayed on the TV screen in step 3, you have selected a point that exceeds the recording time of the disc.

●Some DVD VIDEO discs do not contain time information, and it is not possible to use the Time Search function. In such cases, “X” is displayed on the TV screen as well.

●This function is not possible for a Video CD with PBC function.

3 Press rt to select the desired option, then press ENTER.

NORMAL: Normally select this option.

CINEMA: Suitable for a movie disc, etc.

SHARP: Clearer, sharper-edged picture when viewing images with lots of flat, same-colored surfaces such as cartoons.

SOFT: Select this option when too much noise appears.

To clear the on-screen bar

Press ON SCREEN.