JVC SR-VS10U manual SET Auto Clock to on, Select Host Channel, Semi-Auto

CH

T W

1 2 3

2

4 5 6

7 8 9

0 4

1 DV VHS

3

MENU

OK

EN11

Semi-Auto

You can change the Host Channel/D.S.T. /Time Zone setting manually.

5	SET AUTO CLOCK TO ON
	At the Clock Set screen,	CLOCK SET
	press OK or # repeatedly
		TIME	DATE	YEAR
	to move the highlight bar
		1:00PM	12/24	00 THU
	to "AUTO CLOCK" and
		AUTO CLOCK : ON
	press CH 5° or %Þ to set
		HOST CH	: AUTO (CATV)
	to "ON".	D.S.T.	: AUTO
	a– To select the Host	TIME ZONE : AUTO
		PRESS (5,°), THEN (OK)
	Channel — go to step 6
		PRESS (MENU) TO END
	b– To select the D.S.T.
	mode — go to step 7
	c– To select the Time Zone — go to step 8
	NOTE:
	The time that has been set previously will be erased
	when "AUTO CLOCK", "HOST CH", "D.S.T." or "TIME
	ZONE" setting is changed.
6	SELECT HOST CHANNEL
	You can either select "AUTO" or enter a PBS channel
	number. Move the highlight bar to "HOST CH" by
	pressing OK or #, then press CH 5° or %Þ to set to
	"AUTO" or the desired PBS channel number.
	NOTE:
	There are some PBS channels that do not transmit clock
	setting data.
7	SELECT D.S.T. MODE
	You have three choices:
	a– Select "AUTO" and the adjustment to your VCR's
	clock will be made according to the incoming signal
	from the host channel.
	b– Select "ON" and the adjustment will be made based
	on the clock itself.
	c– Select "OFF" if Daylight Saving Time does not apply
	to you.
	Move the highlight bar to "D.S.T." by pressing OK or #,
	then press CH 5° or %Þ to select the desired mode.

**AUTO DAYLIGHT SAVING TIME

This function enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time.

With Auto DST activated, . . .

. . . on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM.

. . . on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM.