JVC SR-VS10U Engage Manual Tracking Mode, Adjust Manual Tracking, RE-ENGAGE Automatic Tracking

26ENPLAYBACKANDRECORDINGFEATURES(cont.)

POWER		PLAY
	TOP
		FF
	REW	CH
		PAUSE

POWER

DISPLAY

T	2	W
1		3
		2
4	5	6
7	8	9
C.RESET	0	4
		CH
LAY

Manual Tracking

(VHS deck only)

Once playback begins, the VCR’s automatic tracking function is engaged. If tracking noise appears in the picture, you can override this and make the adjustment manually.

ENGAGE MANUAL

TRACKING MODE

1 During playback, press the CH5 and ° buttons on the

VCR's front panel simultaneously to cancel the automatic tracking mode and enable manual tracking adjust.

ADJUST MANUAL

TRACKING

2 Press CH 5(+) or ° (–) on the VCR's front panel or remote. Press briefly for fine adjust, or press and hold for coarse adjust. Watch the screen and continue adjusting until optimum picture and sound quality are achieved.

RE-ENGAGE AUTOMATIC TRACKING

3 Press the CH5 and ° buttons on the VCR's front panel simultaneously.

●When automatic tracking is re-engaged, Video Calibration is automatically activated.

1 DV VHS

NOTES:

REW

STOP

FF

PAUSE

●To obtain a noiseless still picture it may be necessary to adjust tracking in slow playback and then engage Pause.

●Manual tracking is possible during hands-free slow-motion. During hands-free slow-motion playback, simply press CH 5 (+) or ° (–) on the VCR's front panel or remote to adjust tracking.

3

JOG/SHUTTLE

SHUTTLE

Index Search (VHS deck only)

Index codes are placed on the tape at the start of each recording. You can find and automatically play back from the start of any recording using the Index Search function.

1	START SEARCH
	While the tape is stopped, press ª or £.
	ACCESS DISTANT CODE
2	To access a recording 2–9 index codes away, press
	ª or £ repeatedly until the correct number is
	displayed on screen (only if "SUPERIMPOSE" is set to
	"ON" (☞ pg. 25). Playback begins automatically when
	the desired recording is located.
	● If necessary press REW or FF when play starts to
	search visually to find the very beginning of the
	desired program.

NOTE:

An index code is not placed on the tape when recording is paused and then resumed.