JVC SR-VS10U Select AUX Input SET Mode, Select Edit for Picture, Control SET Mode, VHS Deck only

3 MENU

OK SET RECORDER’S INPUT MODE

EN57

			CH
DV			VHS
	NUMBER "0"	0	4

VHS

1	DV VHS
DV

4	Set to "AUX". Press the NUMBER key “0” and/or CH to
	select depending on the connector being used – "L-1"
	for the rear panel input connectors, or "L-2" for the front
	panel input connectors.
5	ACCESS MAIN MENU SCREEN
	Press MENU.
6	ACCESS MODE SET SCREEN
	Press CH 5° or %Þ to move the highlight bar (arrow)
	to “MODE SET”, then press OK or #.
7	SELECT AUX INPUT SET MODE
	a– FRONT S-VIDEO IN :	MODE SET
	Move the highlight bar
		REAR AUX INPUT	VIDEO
	(arrow) to "FRONT	=FRONT AUX INPUT	VIDEO
		OUTPUT1	AUTO
	AUX INPUT" by	2ND AUDIO RECORD	OFF
	pressing CH 5° or
		AUTO TIMER	OFF
	%Þ, then press OK or	SUPERIMPOSE	ON
	# to set to "S-VIDEO".	SELECT WITH (5,°) AND (OK)
	b– FRONT VIDEO IN:	PRESS (MENU) TO END
	Move the highlight bar
	(arrow) to "FRONT AUX INPUT" by pressing CH
	5° or %Þ, then press OK or # to set to "VIDEO".
	c– REAR S-VIDEO IN:	MODE SET
	Move the highlight bar
		=REAR AUX INPUT	VIDEO
	(arrow) to "REAR AUX	FRONT AUX INPUT	VIDEO
	INPUT" by pressing CH	OUTPUT1	AUTO
	5° or %Þ, then press	2ND AUDIO RECORD	OFF
		AUTO TIMER	OFF
	OK or # to set to "S-	SUPERIMPOSE	ON
	VIDEO".	SELECT WITH (5,°) AND (OK)
	d– REAR VIDEO IN: Move
		PRESS (MENU) TO END
	the highlight bar
	(arrow) to "REAR AUX INPUT" by pressing CH 5°
	or %Þ, then press OK or # to set to "VIDEO".

	SELECT “EDIT” FOR PICTURE
	CONTROL SET MODE
8	(VHS DECK ONLY)
	Follow the “Picture Control” section on page 28, then
	NOTE:select “EDIT.”
	When you select “EDIT” to dub tapes, be sure to select
	“AUTO” or (“NORM” when “VIDEO CALIBRATION” is
	set to “OFF”) after you finish dubbing the tapes.
9	RETURN TO NORMAL SCREEN
	Press MENU.
10	START PLAYER
	NOTE:Set the camcorder to its play mode.
	If the camcorder is equipped with a superimpose/OSD
	disable feature then set its superimpose or display
	feature to OFF before pressing play.
11	START RECORDER
	Set your VCR to its record mode.
	● If you are using a Master Edit Control-equipped JVC
	camcorder, it can put the recorder automatically into
	Record mode. (Refer to camcorder's instruction
	manual.)

NOTE:

If you use an auxiliary input to connect a cable box or DBS receiver, make sure that the correct AUX INPUT ("VIDEO" or "S-VIDEO") is selected after you have finished editing (☞ steps 5 – 7).