JVC SR-VS10U manual Tape Dubbing, Load Cassettes, Select Dubbing, Direction, Start Dubbing

50ENEDITING

	Dubbing An Entire Cassette
Tape Dubbing
	equipment.
	Because this VCR includes both a VHS deck and a DV deck,
	you can easily use it for dubbing without connecting any other

		1	LOAD CASSETTES
			Insert a VHS (or S-VHS) cassette and a Mini DV
DV			cassette.
			SELECT DUBBING
		2	DIRECTION
			Press → when you want playback on the DV deck and
DUB	VHS		ORrecording on the VHS deck.
			Press ← when you want playback on the VHS deck and
			recording on the DV deck.

			3	SET TAPE SPEED
				Press VHS or DV for the recording deck, then press
T	W			SP/EP (SP/LP for the DV deck).
1	2	3		START DUBBING
		2	4
4	5	6		Press DUB for two seconds.
7	8	9		● If the tapes have not been rewound, both decks
	0	4		rewind automatically. The recording deck goes into
		DV		Record-Pause mode, and the playback deck goes into
				Pause mode.
			VHS	When both decks have finished rewinding, dubbing
SP/EP 1				begins automatically.
	DV	VHS		After dubbing is completed, the decks rewind both
				tapes automatically and eject them. The VCR then
				shuts off.

3

NOTES:

●If you set the dubbing direction incorrectly, you could erase an important recording that you wanted to copy. We recommend conducting a test with unimportant cassettes first.

●On the cassette that you are playing (i.e., recording from) we recommend either setting the erase protection switch to "SAVE" (if the cassette is a Mini DV cassette), or breaking off the record safety tab (if the cassette is a VHS cassette).