JVC SR-VS10U Locate EDIT-OUT Point, USE FADE/WIPE Effect on Scene Transition If Necessary, Pause

EN53

LOCATE EDIT-OUT POINT

6

Press PLAY to start playback. Find the point where you want the edited scene to end, then press

PAUSE.

Then, press IN/OUT. The edit-out point appears on the screen.

P1 IN	OUT MODE
1 – – 0 : 3 1 : 0 2	→ 0 : 5 4 : 0 0 – – – –

2– – – : – – : – –→

3→

4→

5→

6→

7→

8→

TC 0 : 0 0 : 1 0 TOTAL 0 : 2 2 : 5 8

T	W	3
1	2
			2
4	5	6	EFFECT
FADE/WIPE	8	9
7
CANCEL	0		4
1	DV	VHS
PLAY

PAUSE

3	R.A. EDIT
	IN/OUT

7

USE FADE/WIPE EFFECT ON SCENE TRANSITION

(IF NECESSARY)

Press FADE/WIPE.	P1	IN	OUT MODE
	1 WH 0 : 3 1 : 0 2 → 0 : 5 4 : 0 0 P - -
● Cycle through the effects
	2	P– : – – : – – →
by pressing repeatedly,	3	→
and stop when the one	4	→
	5	→
you want is displayed.	6	→
● If you select a Fade/	7	→
	8	→
Wipe effect for an Edit-	TC 0 : 0 0 : 1 0 TOTAL 0 : 2 2 : 5 8
Out point, the effect is

automatically applied to the following Edit-In point.

●You can't use a Picture Wipe/Dissolve at the end of the last scene.

●When you use Fade/Wipe effects, that time is included in the total time (this does not apply to Picture Wipe/Dissolve).

USE PLAYBACK EFFECT (IF NECESSARY)

8

Press EFFECT.

●Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.

●You can use Classic Film, Monotone, Sepia, Strobe or Video Echo effects. (☞ pg. 32)

●You can also select – – – – are displayed.

P1 IN OUT MODE

1WH 0 : 3 1 : 0 2 → 0 : 5 4 : 0 0 P

2P– : – – : – – →

3→

4→

5→

6→

7→

8→

TC 0 : 0 0 : 1 0 TOTAL 0 : 2 2 : 5 8

so that the date and time

9

REGISTER ADDITIONAL SCENES

Repeat steps 5 – 8.

●To change previously registered points, press CANCEL. The registered points disappear, one at a time, from the most recently registered point.

●If you're not using Fade/Wipe or Playback Effects, repeat steps 5 and 6 only.