JVC TK-C1460B instruction manual Video Adjust Screen

MENU SETTING
ALC SETTINGS Screen (Continued)
Item	Functions and set values	Initial value

VIDEO ADJUST Screen

Adjustments are made on video signals.

B&W COLOUR MODE ..

B&W

This function sets the colour modes to colour or B&W.
When switching the mode between “colour’’ and “B&W”
is carried out, the focus may be dislocated. In such a
case adjust the focus again.
Switches the mode from colour to B&W and visa-versa.
OFF	: Turns the B&W mode switching function off.
ON	: Sets the camera permanently to B&W mode.
AUTO	: The camera automatically switches to Colour
	mode when the object is bright and B&W mode
AUX	when it is dark. ( Page 40)
	: B&W/COLOUR switching is carried out

AUX

Item		Functions and set values	Initial value
WHITE	Selects the white balance adjustment function. The white		ATW
BALANCE	balance can be adjusted manually or automatically for
	light within the colour temperature range of 2500K to
	8000K.
	• ATW:	Auto-Tracking White Balance mode.
	• AWC:	This automatically adjusts the white balance.
		Auto White Balance Controll mode. When the
		SET button is pressed, the adjustment
		screen appears.
		( See page 37.)

LEVEL

according to the signal input from the AUX

terminal. ( Page 41)

MEMO

•If AUTO is selected as the B&W item, the B&W/COLOUR setting can be switched as appropriate according to the brightness of the object, but illumination and screen conditions may make this impossible. Moreover, when you use infrared illumination, if the subject excessively reflects, a B/W screen can switch to a color screen. To make absolutely certain of B&W/COLOUR switching, set to AUX and input the control signal to the AUX terminal.

•If AUX is selected as the B&W item, the AUX TERMINAL item is automatically set to B&W IN. If this changes to anything other than AUX, the AUX TERMINAL item reverts to the value set before the change was made. ( Page 33.)

When the “B&W” function is set to “AUTO”, this function
sets the signal level of the object at which the camera will
automatically switch to B&W mode.
LOW		: Switches to B&W mode when the signal level of
		the object indicates low illumination.
NORMAL: Switches to B&W mode when the signal level of
HIGH		the object indicates medium illumination.
		: Switches to B&W mode when the signal level of
		the object indicates high illumination.
	MEMO
When the item “B&W” is set to other than AUTO, “- - -” is
displayed and the settings to the item “LEVEL” cannot be
varied.

NORMAL

COLOUR LEVEL

ENHANCE LEVEL

PEDESTAL LEVEL

AUTO

BLACK

CTL

MEMO The “- - -” will appear during operation in the black-and- white mode and any setting cannot be changed.

To adjust the colour level of the video signal.

•To make colours lighter … Decrease the value

•To make colours darker … Increase the value [Set values: –5 to NORMAL to 5]

MEMO

The “- - -” will appear during operation in the black-and- white mode and any setting cannot be changed.

To adjust the contour enhancing level of the video signal.

•To make the picture quality harder … Increase the value

•To make the picture quality softer … Decrease the value [Set values: –5 to NORMAL to 5]

To adjust the pedestal level of the video signal.

•To brighten picture … Increase the value

•To darken picture … Decrease the value [Set values: –5 to NORMAL to 5]

This is set when it is difficult to view a dark part of the image even if gain is boosted by the AGC (automatic gain control). ON: When a black level of the image signal is low, a pedestal level that becomes the standard of black is automatically elevated, making it easier to view a dark part. OFF: AUTO BLACK does not function.

MEMO

•When PEDESTAL LEVEL is set to 5, no function can take place even if AUTO BLACK CTL is ON.

•When AGC MODE is set to OFF, no function can take place even if AUTO BLACK CTL is ON.

NORMAL

NORMAL

NORMAL

OFF

E-30 E-31