MENU SETTING

 

 

MOTION DETECT Screen

 

Settings are executed about the motion detecting function that emits alarm signals when

there exists any motion in the image. Alarm signals are output from the auxiliary terminals on

the back.

 

 

 

Item

 

Functions and set values

Initial value

MODE

This sets ON/OFF of motion detecting function.

OFF

 

OFF:

Motion detecting function does not work.

 

 

ON:

Motion detecting function works.

 

LEVEL

This sets the level that detects motion.

NORMAL

 

If the item MODE is set to OFF, “- - -” will appear, and

 

 

settings cannot be changed.

 

 

To function with large signal level change…decrease the

 

 

value

 

 

 

To function with small signal level change…increase the

 

 

value

 

 

 

[Set values: –5 to NORMAL to 5]

 

AREA EDIT

This sets the range in which the motion detecting function

 

works.

 

 

 

( Page 37)

 

COMMUNICATION Screen

 

Settings are made for the control signal-connecting terminals on the back.

 

If the setting is changed, be absolutely sure to switch on the power again.

 

Item

Functions and set values

Initial value

STYLE

This sets a communication system according to the

P TO P

 

system used.

 

 

P TO P (Point to point)

 

 

This is set when a remote control unit controls a camera.

 

 

M.DROP (Multi-drop)

 

 

This is set when a remote control unit controls a plural

 

 

number of cameras.

 

MACHINE ID

This is set when the STYLE item is set to M.DROP. This

– – –

 

is the number that identifies individual cameras in a group.

 

 

No proper function can be realized if an ID number is

 

 

repeated within a system.

 

 

A combined use with the RM-P2580 necessitates the

 

 

setting together with the video input number of the RM-

 

 

P2580.

 

 

If the item STYLE is set to P TO P, “- - -” will appear, and

 

 

settings cannot be changed.

 

 

[Set values: 1 to 99]

 

ALARM TIME This sets the output time of the alarm signal output of

10s

AUX terminal as well as “ALARM” display on the screen

 

when motion is detected.

 

If the item MODE is set to OFF, “- - -” will appear, and

 

settings cannot be changed.

 

[Set values: OFF, 5s, 6s, 7s, 8s, 9s, 10s, 15s, 20s, 30s,

 

1min]

 

MEMO

 

When the MODE item is set to OFF, only the alarm signal

 

MAINTENANCE Screen

White spot compensation is performed.

Item

Functions and set values

CCD SPOT

The white spots on the screen, which are characteristic

 

for CCDs can be reduced.

Page 38 “White Spot Compensation”

Initial value

 

of the AUX terminal is output, and “ALARM” is not

 

 

displayed on the screen.

 

DEMONSTRATION

This is used when checking and confirming the set motion

 

detecting function. The detection area is shown in gray.

 

 

 

( Page 37)

 

FACTORY SETTINGS Screen

Set values are returned to initial values.

Item

 

Functions and set values

FACTORY

The values set on the menu are returned to initial values.

SETTINGS

CANCEL

:

No return to the initial value.

 

CLEAR

:

Returns set values except titles to the

 

(WITHOUT TITLE)

 

initial value.

 

CLEAR (ALL)

:

Returns all set values including titles

 

 

 

to the initial value.

 

Select respective set value and press the SET button.

 

Then, “DATA CLEARED” will appear for about 3 seconds.

 

Be sure not to switch off the power while the display is

 

still on.

 

 

 

MEMO

 

 

 

However, when making settings by means of transmitted

 

commands, the contents of the COMMUNICATION menu

 

do not return to the factory settings.

Initial value

E-32

E-33

Page 39
Image 39
JVC TK-C1460B instruction manual Functions and set values Initial value, Area Edit