MENU SETTING MODE SELECT Screen Titles, image reversion, etc., are set.
Item
CAMERA TITLE EDIT
REVERSE MODE
HLI MODE
ALM.TITLE SIZE
| Functions and set values |
Bring up the CAMERA TITLE, EDIT screen. | |
( Page 38) | |
Settings are executed for image reversion. | |
OFF: Image does not reverse. | |
Left and right of the image are reversed. | |
ALL: Up and down and left and right of the image are | |
| reversed. |
The highlighted part of the image is made black to make | |
the surroundings of the highlighted part better visible. Set | |
to HIGH when there are many highlighted parts. | |
[Set values: OFF, LOW, MIDDLE, HIGH] | |
Set the size of the characters displayed in the case of | |
alarms. | |
Initial value | Item |
– | AUX |
| TERMINAL |
OFF |
|
OFF
DOUBLE
| Functions and set values | Initial value |
For setting the signal input or output of the AUX terminal. | (B&W IN) | |
MOTION: | A signal is output if there is a change in the |
|
B&W OUT: | area set on the MOTION DETECT screen. |
|
A signal is output when the camera switches |
| |
| to B&W or Colour mode. |
|
B&W IN: | Set to this position when inputting the B&W/ |
|
| Colour switching control signal to the AUX |
|
| terminal. ( Page 11, 30.) |
|
MEMO |
|
|
• In setting B&W OUT, if you use an infrared illuminator in |
link motion, hunting can occur. To prevent this, we |
recommend that you link in motion this unit and the |
infrared illuminator, etc., by control signals after setting |
to B&W IN. |
• If the B&W item is set to AUX, the AUX TERMINAL item |
A L A R M | A L A RM |
|
D.ZOOM
MAX
|
|
| NORMAL | DOUBLE |
|
ALARM | This sets the colour of an alarm title. | WHITE | |||
COLOUR | [Set values: WHITE, YELLOW, CYAN, GREEN] |
| |||
|
|
|
|
| |
|
| MEMO |
|
|
|
| In the ALARM mode, the colour of camera title appears |
| |||
| in the ALARM COLOUR set. |
|
| ||
changes to [B&W IN] and can not be changed. |
This function sets the maximum zoom ratio of the | x2 |
electronic zooming. |
|
[Set values: x1, x2, x4, x6, x8, x10] |
|
MEMO |
|
•The electronic zoom function can only be used by the communication command of exclusive controllers (RM- P2580, etc.).
•Note Picture quality deteriorates under electronic zooming as it is accompanied by digital image processing.
•When the electronic zoom magnification ratio is increased, there may be blurring in the upper center left of the screen. This is a characteristic of the main unit and is not a malfunction.
