![](/images/new-backgrounds/1316314/31631475x1.webp)
MENU SETTING |
|
| ||
VIDEO ADJUST Screen |
| |||
Adjustments are made on video signals. |
| |||
Item |
| Functions and set values | Initial value | |
WHITE | Selects the white balance adjustment function. The white | ATW | ||
BALANCE | balance can be adjusted manually or automatically for |
| ||
| light within the colour temperature range of 2500K to |
| ||
| 8000K. |
|
| |
| • ATW: |
| ||
| • AWC: | This automatically adjusts the white balance. |
| |
| Auto White Balance Controll mode. When the |
| ||
|
| SET button is pressed, the adjustment |
| |
|
| screen appears. |
| |
|
| ( See page 35.) |
| |
COLOUR | To adjust the colour level of the video signal. | NORMAL | ||
LEVEL | • To make colours lighter … Decrease the value | |||
| ||||
| • To make colours darker … Increase the value |
|
MODE SELECT Screen | |
Titles, image reversion, etc., are set. | |
Item | Functions and set values |
CAMERA | Bring up the CAMERA TITLE, EDIT screen. |
TITLE EDIT | ( Page 36) |
REVERSE | Settings are executed for image reversion. |
MODE | OFF: Image does not reverse. |
| |
| |
| ALL: Up and down and left and right of the image are |
| reversed. |
HLI MODE | The highlighted part of the image is made black to make |
| the surroundings of the highlighted part better visible. Set |
| to HIGH when there are many highlighted parts. |
| [Set values: OFF, LOW, MIDDLE, HIGH] |
Initial value –
OFF
OFF
| [Set values: |
| |
ENHANCE | To adjust the contour enhancing level of the video signal. | NORMAL | |
LEVEL | • To make the picture quality harder … Increase the value | ||
| |||
| • To make the picture quality softer … Decrease the value |
| |
| [Set values: |
|
ALM.TITLE | Set the size of the characters displayed in the case of | DOUBLE | |
SIZE | alarms. |
|
|
| A L A R M | A L A RM |
|
|
|
|
PEDESTAL LEVEL
AUTO
BLACK
CTL
To adjust the pedestal level of the video signal.
•To brighten picture … Increase the value
•To darken picture … Decrease the value [Set values:
This is set when it is difficult to view a dark part of the image even if gain is boosted by the AGC (automatic gain control). ON: When a black level of the image signal is low, a pedestal level that becomes the standard of black is automatically elevated, making it easier to view a dark part. OFF: AUTO BLACK does not function.
MEMO
•When PEDESTAL LEVEL is set to 5, no function can take place even if AUTO BLACK CTL is ON.
•When AGC MODE is set to OFF, no function can take place even if AUTO BLACK CTL is ON.
NORMAL
OFF
|
|
| NORMAL | DOUBLE |
|
ALARM | This sets the colour of an alarm title. | WHITE | |||
COLOUR | [Set values: WHITE, YELLOW, CYAN, GREEN] |
| |||
D.ZOOM | This function sets the maximum zoom ratio of the | x2 | |||
MAX | electronic zooming. |
|
| ||
| [Set values: x1, x2, x4, x6, x8, x10] |
| |||
|
|
|
|
|
|
|
| MEMO |
|
|
•The electronic zoom function can only be used by the communication command of exclusive controllers (RM- P2580, etc.).
•Note Picture quality deteriorates under electronic zooming as it is accompanied by digital image processing.
•When the electronic zoom magnification ratio is increased, there may be blurring in the upper center left of the screen. This is a characteristic of the main unit