Transferring (Dubbing) | DVD VHS |
|
|
∫About FR mode
When “Time Setting” is set to “Off” in step 6 on page 58:
≥The recording mode is automatically selected by estimating the remaining capacity of the disc for transfer (dubbing) of only the recorded parts in the video cassette (unrecorded parts will not
be recorded).
≥When you press [ENTER] to start transfer (dub), the tape is automatically
≥The recording is divided into titles every time the tape index signals are detected.
When “Time Setting” is set to “On” in step 6 on page 58:
≥The recording mode is automatically determined by estimating the remaining capacity of the disc for transfer (dubbing) of the contents equivalent to the recording time set from the start point of the transfer (dubbing) on the video cassette (unrecorded parts will also be recorded).
≥The recording is not divided into titles.
∫Manual Transfer (Dubbing) (VHS l DVD)
You can transfer (dub) programmes recorded on a tape onto a disc° by specifying the recording parts while watching them.
°Available discs for transfer (dubbing) from tape are [RAM]
Preparation
≥Select the unit viewing channel (e.g. AV input) on the TV.
VHS (Recording source)
≥Insert the video cassette containing the programme to be copied. (l 48)
DVD (Recording target)
≥Release protection. (disc l 28, cartridge l 28) [RAM]
≥Insert a disc and confirm there is sufficient empty space for recording on it. (l 8, 47)
Settings (l 42, TV System)
≥When transferring (dubbing) an NTSC tape to a DVD
-Set “TV System” on “Connection” in SETUP to “NTSC”. ≥When transferring (dubbing) a PAL tape to a DVD
-Set “TV System” on “Connection” in SETUP to “PAL”.
[1]Press [VHS] and press [1, PLAY].
≥Start playing the video cassette and find the start point of the
recording.
≥Press [AUDIO] to select the audio to be played (the audio to be recorded) beforehand.
[2]Press [;, PAUSE] at the start point of the recording.
[3]Press [DVD].
[4]Select “TP” channel with [INPUT SELECT] or
[CH, W, X].
≥The VHS picture is displayed on the TV.
≥When the DC channel is selected on VHS, you cannot select the TP channel.
[5]Press [REC MODE] to select the recording mode. (l 23)
[6]Press [¥, REC].
≥Disc recording and VHS play start at the same time.
To pause or stop Manual Transfer (Dubbing)
You cannot stop or pause DVD and VHS at the same time.
∫To pause or stop recording
Press [DVD] and then press [;, PAUSE] or [∫, STOP].
∫To pause or stop play
Press [VHS] and then press [;, PAUSE] or [∫, STOP].
∫About TP channel
(TP: Dubbing input channel)
When the TP channel is selected, it becomes possible for DVD to receive audio and video signals from VHS. This enables you to transfer (dub) the video played back on VHS to DVD.
≥The TP channel can be selected by pressing [DVD] and pressing [INPUT SELECT] or [CH, W, X] several times.
≥When you play back a tape after turning the channel to TP, the picture on VHS is displayed on the TV screen. Utilizing this feature, you can enjoy the picture on the tape in progressive output. (l 50)
≥Contrary to the TP channel, the DC channel enables VHS to receive audio and video signals from DVD.
≥When the DC channel is selected on VHS, you cannot select the TP channel on DVD.
Transferring (Dubbing)
59
VQT0P03
