Getting started
STEP 3 Set up to match your TV and remote control
started
Preparation
≥Press [DVD].
∫When other Panasonic products respond to this remote control
Change the remote control code on the main unit and on the remote control (the two must match) if you place other Panasonic products close together. When changing the remote control code, make sure the two codes are same.
Use “MODE 1”, the factory set code, under normal circumstances.
[1]While stopped
Press [FUNCTIONS].
[2]Select “To Others” with [3, 4] and press [ENTER].
FUNCTIONS DVD | Cartridge Protection Off |
Disc Protection Off |
Playback | DIRECT NAVIGATOR | PLAYLISTS |
|
| FLEXIBLE REC |
Recording | TIMER RECORDING | SETUP |
123 | DISC MANAGEMENT | |
Dubbing | DUBBING |
|
ENTER | To Others | Return |
RETURN |
|
|
[3]Press [3,4] to select “SETUP” and press [ENTER].
[4]Press [3,4] to select “Connection” and press [2, 1].
[5]Press [3,4] to select “TV Aspect” and press [ENTER].
[6]Press [3,4] to select the TV aspect and press [ENTER].
SETUP |
| TV Aspect | |
| 16:9 WIDE TV | ||
|
| 16:9 |
|
|
|
|
|
Tuning | 4:3 TV | ||
|
|
|
|
Disc |
| 4:3 |
|
|
|
|
|
Picture |
| Letterbox |
|
|
|
|
|
Sound
Display | SELECT |
Connection |
|
Others | ENTER |
RETURN |
≥16:9: 16:9 widescreen television
≥4:3: 4:3 aspect television
[RAM] Titles are recorded as they appear on screen.
≥Letterbox: 4:3 aspect television
Widescreen picture is shown in the letterbox style (l 66).
Getting
[3]Select “SETUP” with [3, 4] and press [ENTER].
[4]Select “Others” with [3, 4] and press [2, 1].
[5]Select “Remote Control” with [3, 4] and press [ENTER].
[6]Use [3, 4] to select the code (“MODE 1”,
“MODE 2” or “MODE 3”) and press [ENTER].
≥The code on the unit has been set.
[7]While pressing [ENTER], press and hold for about 2 seconds the numeric button ([1], [2] or [3])
corresponding to the code you selected in step 6.
≥The code on the remote control has been set.
[8]Press [ENTER].
∫When the following indicator appears on the unit’s display
The unit’s remote control code
Change the code on the remote control to match the main unit’s code (l step 7).
∫Selecting TV type
Choose the setting to suit your television and preference.
[1]While stopped
Press [FUNCTIONS].
[2]Press [3,4] to select “To Others” and press [ENTER].
FUNCTIONS DVD | Cartridge Protection Off |
Disc Protection Off |
Playback | DIRECT NAVIGATOR | PLAYLISTS |
|
| FLEXIBLE REC |
Recording | TIMER RECORDING | SETUP |
123 | DISC MANAGEMENT | |
Dubbing | DUBBING |
|
ENTER | To Others | Return |
RETURN |
|
|
∫TV operation
To turn the TV on/off, change the TV input mode, select the TV channel and change the TV volume by means of this remote control, set the remote control as follows.
Point the remote control at the TV
While pressing [Í, TV], enter the code using the numeric buttons.
e.g., 01: press [0] > [1].
Manufacturer and Code No.
Brand | Code |
Panasonic/National | 01/02/03/04 |
|
|
GOLDSTAR/LG | 15/16 |
HITACHI | 08 |
|
|
JVC | 07 |
MITSUBISHI | 09/10 |
|
|
NEC | 13 |
PHILIPS | 12 |
|
|
SAMSUNG | 17/18 |
SANYO | 14/19 |
|
|
SHARP | 11 |
SONY | 05 |
|
|
TOSHIBA | 06 |
≥Test by turning on the TV and changing channels. Repeat the procedure until you find the code that allows correct operation.
≥If your TV brand is not listed or if the code listed for your TV does not allow control of your TV, this remote control is not compatible with your TV.
|
|
∫To return to the previous screen | ∫To exit the screen |
Press [RETURN]. | Press [RETURN] several times. |
17
VQT0P03
