Panasonic DMR-ES30V Recording from an external device, Press , PAUSE, then press ¥, REC

Transferring (Dubbing) DVD VHS

Recording from an external device

When connecting to the AV3 input terminals on the front of the unit

≥You can also connect to the AV1 or AV2 input terminals on the rear of

the unit.
Before connecting any cables, first make sure that the power for		EJECT
		S VIDEO IN		C
the unit and the external device are off. Then, after connecting	VIDEO IN	L/MONO– AUDIO IN – R
cables, turn on both.		AV3
Note
≥If the audio output of the other equipment is monaural, connect to L/
MONO. (Both left and right channels are recorded when connected				(1)	Audio/Video cable (not supplied)
through L/MONO.)
					A Yellow (VIDEO)
≥The S VIDEO IN terminal achieves a more vivid picture than the
					B White (L)
VIDEO IN terminal.
					C Red (R)
			(2)
				(2)	S Video cable (not supplied)
	(1)			(3)	External device
					(Playback equipment)

(3)

Preparation

≥Select the unit viewing channel (e.g. AV input) on the TV.

DVD [RAM] [-R] [-RW‹V›] [+R]

≥Release protection (disc l 28, cartridge l 28). [RAM] ≥Press [DVD].

≥When recording bilingual programmes [RAM]

When both M 1 and M 2 is selected on the connected equipment, you can select the audio type in playback. [-R][-RW‹V›] [+R]

Select either M 1 or M 2 on the connected equipment. (You cannot switch between audio types during playback.)

≥When the output signal from the external equipment is NTSC, change the “TV System” to “NTSC” in the SETUP menu (l 42). ≥This unit cannot record to discs containing both PAL and NTSC signals.

VHS

≥Insert a video cassette with an accidental erasure prevention tab. (l 48) ≥Press [VHS].

[1]Press [REC MODE] to select the recording mode. (DVD l 23, VHS l 51)

≥DVD [RAM] [-R] [-RW‹V›] [+R]

-It is also possible to perform Flexible Recording (FR). (l 24)

[2]While stopped

Press [CH, W, X] or [INPUT SELECT] to select the input channel for the equipment you have connected.

≥Select AV1, AV2 or AV3.

1DVD

Follow the above steps 1 to 2.

[3]Start play on the external device.

[4]Press [¥, REC] at the point where you want to start recording.

1VHS

Follow the above steps 1 to 2.

[3]Press [1, PLAY].

≥Start playing the video cassette and find the recording start point.

[4]Press [;, PAUSE], then press [¥, REC].

≥Put the unit in recording standby mode.

Transferring (Dubbing)

[5] Start play on the external device.

[6] Press [;, PAUSE] at the point where you want to start recording.

∫To skip unwanted parts

Press [;, PAUSE] to pause recording. (Press again to restart recording.)

∫To stop recording

Press [∫, STOP].

For your reference

≥Almost all videos and DVD software on sale have been treated to prevent illegal copying. Such software cannot be recorded.

65

VQT0P03