Integra DTR-7.6/6.6 1 1 2 3, Selecting XM Radio Channels, Channels cannot be selected while the

DTR-7.6,6.6.book Page 49 Monday, September 26, 2005 1:40 PM

Listening to the Radio—Continued

Selecting XM Radio Channels

There are two modes for selecting XM radio channels: Channel Search mode, which allows you to select any channel.

Category Search mode, which allows you to select channels by category.

1

1

2

3

Return

■ Channel Search Mode

1	Press the [Receiver] Remote
	Mode button, and then press the
	[Tuner] Input Selector button
	repeatedly to select XM.
	If “CHECK ANTENNA” appears on
	the display, make sure the XM antenna
	is connected properly.
2	Press the [Menu] button to select
	“Channel Search” mode.

3	Use the Up and Down [	]/[ ]
	buttons to select a channel.
	Channel number Channel name
	You can also use the Left and Right
	[ ]/[ ] buttons to select a category.
Note:
Channels cannot be selected while the		indicator
is flashing, as tuning is in progress.

■ Category Search Mode

1	Press the [Receiver] Remote
	Mode button, and then press the
	[Tuner] Input Selector button
	repeatedly to select XM.
	If “CHECK ANTENNA” appears on
	the display, make sure the XM antenna
2	is connected properly.
	Press the [Menu] button to select
	“Category Search” mode.
3	Use the Left and Right [	]/[	]
	buttons to select a category, and
	use the Up and Down [	]/[	]
	buttons to select a channel in
	that category.
Note:
Channels cannot be selected while the		indicator

is flashing, as tuning is in progress.

Selecting the Previous Channel:

To listen to the previously selected XM channel.

1	Press the [Receiver] Remote
	Mode button, followed by the
	[Return] button.
	You can also use the AV receiver’s
	[Return] button.

49