Integra DTR-7.6/6.6 instruction manual HDMI Video Setup DTR-7.6Only, First Time Setup—Continued

DTR-7.6,6.6.book Page 41 Monday, September 26, 2005 1:40 PM

First Time Setup—Continued

HDMI Video Setup (DTR-7.6 Only) 1

Press the [Receiver] button, fol- lowed by the [Setup] button. The main menu appears onscreen.

1

2 2, 3

1, 4

2

3

Use the Up and Down []/[ ] buttons to select “0.HDMI Video,” and then press [Enter].

The HDMI Video menu appears.

0.HDMI Video

------------------------

a.DVD	:No
b.VIDEO1	:No
c.VIDEO2	:No
d.VIDEO3	:No
e.VIDEO4	:No

Use the Up and Down [ ]/[ ] buttons to select an input selec- tor, and use the Left and Right []/[ ] buttons to select:

IN1: Select if the video component is connected to HDMI IN 1.

If you connect a video component to HDMI IN 1 or 2, you must assign that input to an input selector. For exam- ple, if you connect your DVD player to HDMI IN 1, you must assign HDMI IN 1 to the DVD input selector.

Note:

When HDMI IN 1 or 2 is assigned to an input selector here, the digital audio input for that selector is automat-

ically set to HDMI IN 1 or 2. See “Digital Audio Input 4 Setup” on page 43.

IN2: Select if the video component is connected to HDMI IN 2.

No: Select if you’re not using a HDMI connection.

Press the [Setup] button.

Setup closes.

41