Integra DTR-7.6/6.6 instruction manual Input Setup, Delay, 3 4 5, Advanced Setup—Continued

DTR-7.6,6.6.book Page 72 Monday, September 26, 2005 1:40 PM

Advanced Setup—Continued

Input Setup

This section explains items on the “Input Setup” menu.

Receiver
Enter
Return	Setup
Delay
■ A/V Sync

When using progressive scanning, you may find that the picture and sound are out of sync. With this setting, you can correct this by delaying the audio signals from 0 to 250 milliseconds (ms) in 1 millisecond steps.

1	During playback, press the
	[Receiver] Remote Mode button,
	followed by the [Setup] button.
	The main menu appears onscreen.

3

4

5

Use the Up and Down []/[ ] buttons to select “Delay,” and then press [Enter].

The Delay menu appears.

4-1.Delay
---------VIDEO1	---------
a.A/V Sync	: 45ms

Press Enter

to see picture while adjusting.

Press Return

to return to setup.

Press [Enter] to see the TV pic- ture, and use the Left and Right []/[ ] buttons to adjust the delay so that the sound and pic- ture are in sync.

Press the [Return] button to return to the Delay menu.

When you’ve finished, press the [Setup] button.

Setup closes.

2	Use the Up and Down [ ]/[ ]
	buttons to select “4. Input Setup,”
	and then press [Enter].
	The Input Setup menu appears.
	4.Input Setup
	---------VIDEO1---------
	1.Delay
	2.Character Edit

Note:

•This procedure can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

72