Integra DTR-7.6/6.6 Displaying XM Radio Information, Selecting XM Channels from the Front Panel

DTR-7.6,6.6.book Page 50 Monday, September 26, 2005 1:40 PM

Listening to the Radio—Continued

Display

/

Tuner Return

Selecting XM Channels from the Front Panel:

1	Press the [Tuner] input selector
	button repeatedly to select XM.
	If “CHECK ANTENNA” appears on
	the display, make sure the XM antenna
	is connected properly.
2	Use the Tuning Up and Down
	[ ]/[ ] buttons to select a chan-
	nel.
	In Channel Search mode, you can
	select any channel.
	In Category Search mode, you can only
	select channels from the currently
	selected category.

Displaying XM Radio Information

Receiver

Display

The following information can be displayed:

Channel name

Channel number & preset number

Category

Artist

Song title

Listening mode

1

AV receiver

Remote

controller

On the AV receiver, press the [Display] button repeatedly to cycle through the available infor- mation.

On the remote controller, press the [Receiver] Remote Mode but- ton, and then press the [Display] button repeatedly.

Note:

If the category, artist, or song title is not available, “- - -” will be displayed instead.

■Displaying XM Information on Your TV

When you select a different XM channel, or the artist or song title changes, the following information is dis- played on your TV for 5 seconds.

XM	[Category name]
	[Channel name]	[Ch. No]
	[Artist name / Song Title]

Tip:

You can display this information at anytime by pressing the [Display] button.

50