Integra DTR-7.6/6.6 Making HDMI Connections, Connecting Your Components-Continued, DVD player

DTR-7.6,6.6.book Page 35 Monday, September 26, 2005 1:40 PM

Connecting Your Components—Continued

Making HDMI Connections

Step 1: Use HDMI cables to connect the DTR-7.6’s HDMI jacks to your HDMI-compatible DVD player, TV, projector, and so on.

Step 2: Assign each HDMI IN to an input selector in the HDMI Video setup (see page 41).

Video Signal Flow Chart

Digital video signals received at HDMI IN 1 and 2 are only output by the HDMI OUT and sent to your TV. Composite video, S-Video, and component video input signals are not output by the HDMI OUT.

Note:

IN

	HDMI	Composite	S-Video	Component
DTR-7.6
	HDMI	Composite	S-Video	Component

OUT

•The onscreen setup menus are not output by the HDMI OUT, so you’ll also need to make a composite video, S-Video, or component video connection to your TV (see page 24).

Audio Signal Flow Chart

Digital audio signals received at HDMI IN 1 or 2 are output by the speakers and headphones connected to the AV receiver. They’re also output by the OPTICAL OUT and can be output by the HDMI OUT by setting the HDMI Audio Out set- ting to On (see page 75).

IN

DTR-7.6

OUT

HDMI Optical Coaxial Analog

*

HDMI Optical Analog

*To listen to audio received at HDMI IN 1 and 2, through your TV’s speakers, set the HDMI Audio Out setting to On (see page 75). Note that some audio (e.g., DVD-Audio) may not be output by your TV. Also, audio formats and sampling rates not supported by your TV may not be output. Be sure to configure your DVD player’s output settings appropriately.

TV

HDMI	HDMI
IN	OUT

DVD player

HDMI HDMI

IN 1

35