Introduction

Operating PrecautionsStorage and Location of Use

This camera has been designed for indoor use. When you use it outdoors, be sure to use a housing or the like.

Do not install or use the camera in the following places.

●In a place exposed to rain or moisture.

●In a place with vapor or oil, for example in a kitchen.

●When the ambient temperature rises above or falls below the acceptable range (from -10 I to 50 I)

●In a place at which corrosive gases are emitted.

●Near a source of radiation, X-rays, strong radio waves or magnetism.

●In a place subject to vibration.

●In a place with excessive dirt.

Using this unit or cables connected to this unit at places at which strong radio waves and magnetism are emitted (e.g. near a radio, TV, transformer or motor) may give rise to noises in the image and changes in its color.

Maintenance

Turn off the power before performing maintenance.

Clean the camera with a soft cloth. Wiping it with thinner or benzene may melt the surface or cause it to fog. For tough stains, wipe using a cloth that is dipped into a neutral detergent diluted with water, followed by wiping with a dry cloth.

Energy Conservation

When the camera is not in use for a long time, turn off the power of the system for safety and energy conservation reasons.

10